Characteristics of components
M3 nickel plated copper alloy screw.
Polyamide housing.
Standard colour: GREEN.
V0 self-extinguishing according to UL 94.
Chlorinated solvents resistant,
with no phosphor, dioxin or
detrimental to health halogens.
Nickel plated copper alloy clamp
Easy to solder lead-free
tin-plated copper alloy pin.
MSB
Mechanical characteristics
Recommended/highest tightening torque
PCB thickness:
PCB hole diameter:
Stripping length
Operating temperature range
Climatic category
0.5/0.6 Nm (4.42/5.31 lbf in)
max. 2.4 mm (.094 in)
min. 1.1 mm (.043 in) / 1.3 mm (.051 in) for "T" version
5 ÷ 6 mm (.197 ÷ .24 in)
-40 °C ÷ +110 °C (-40 °F ÷ +230 °F)
40/110/21 According to EN 60068-1
Electrical characteristics*
Solid wire section
Stranded wire section
Rated voltage for 5 mm (.197 in) and 5.08 mm (.200 in)
Rated voltage for 10 mm (.394 in) and 10.16 mm (.400 in)
Rated current
Contact resistance
Insulation resistance
30÷16 AWG (UL)* 0.05÷1.5 mm² (IMQ)*
30÷14 AWG (UL)* 0.05÷1.5 mm² (IEC EN)* 55° and "T" versions
30÷16 AWG (UL)* 0.05÷1 mm² (IMQ)*
30÷14 AWG (UL)* 0.05÷1.5 mm² (IEC EN)* 55° and "T" versions
300 V (UL)*
750 V (IMQ)*
17.5 A (IMQ)*
<15 mΩ
>10
9
Ω (500V DC)
*All the above mentioned data refer to the highest values amongst the certified ones.
V
voltage,
I
current values and tightening torque are related to the norms to be applied to the product and to its use.
Approvals
IEC:
EN 60998
250 V - T 110 - 17.5 A - 1.5 mm
2
solid (13.5 A - 1 mm
2
stranded) for 5 mm and 5.08 mm pitch
250 V - T 110 - 17.5 A - 1.5 mm
2
solid and stranded for 55° and "T" versions and 5 mm and 5.08 mm pitch
750 V - T 110 - 17.5 A - 1.5 mm
2
solid (13.5 A - 1 mm
2
stranded) for 10 mm and 10.16 mm pitch
750 V - T 110 - 17.5 A - 1.5 mm
2
solid and stranded for 55° and "T" versions and 10 mm and 10.16 mm pitch
300 V - 13.5 A (factory wiring), 10 A (field wiring) - 30÷16 AWG - 6 lbf·in for 5 mm, 5.08 mm pitch
300 V - 17.5 A (factory wiring), 15 A (field wiring) - 30÷14 AWG - 6 lbf·in for 55° and "T" versions 5 mm, 5.08 mm pitch
600 V - 13.5 A (factory wiring), 10 A (field wiring) - 30÷16 AWG - 6 lbf·in for 10 mm and 10.16 mm pitch
600 V - 17.5 A (factory wiring), 15 A (field wiring) - 30÷14 AWG - 6 lbf·in for 55° and "T" versions 10 mm and 10.16 mm pitch
Application values for end-use equipment have to be in accordance to UL norms and applicable to them.
250 V - 13.5 A - T 110 - 1 mm
2
for 5 mm and 5.08 mm pitch
750 V - 13.5 A - T 110 - 1 mm
2
for 10 mm and 10.16 mm pitch
250 V - T 110 - 17.5 A - 1.5 mm
2
solid (13.5 A - 1 mm
2
stranded) for 5 mm and 5.08 mm pitch
750 V - T 110 - 17.5 A - 1.5 mm
2
solid (13.5 A - 1 mm
2
stranded) for 10 mm and 10.16 mm pitch
VDE:
File n. 40022744
IMQ:
File: EC318
See also “Certifications”, page 4
57
SAURO
ELECTRONIC CONNECTORS
UL:
File E167476
WWW.SAURO.NET
Standard
PRODUCTS
DBLECTRO [ DB LECTRO INC ]
