欢迎访问ic37.com |
会员登录 免费注册
发布采购

8M103G 参数 Datasheet PDF下载

8M103G图片预览
型号: 8M103G
PDF下载: 下载PDF文件 查看货源
内容描述: 电阻网络SIL [RESISTOR NETWORK SIL]
分类和应用:
文件页数/大小: 2 页 / 120 K
品牌: DUBILIER [ DUBILIER ]
 浏览型号8M103G的Datasheet PDF文件第1页  
RESISTORS  
RESISTOR NETWORK SIL  
SPECIFICATION  
Short Term Overload  
Vibration  
∆R/R (1% + 0.05Ω)  
After application of 21/2 x rated voltage, or the maximum overload voltage, whichever smaller, for a period of 5  
secs. Resistance change to be within specification, with no evidence of arcing, burning or charring.  
∆R/R (0.5% + 0.5Ω)  
Resistors are to be subjected to vibration of amplitude 0.8mm for 2 hours in each of three mutually  
perpendicular directions. The vibration frequency shall be swept from 10 to 55 to 10Hz in 1 minute.  
Resistance change to be within specification with no evidence of damage.  
Components shall withstand twice their rated voltage for 1 minute applied between termination and substrate. No  
evidence of arcing, burning or charring.  
Dielectric Strength  
Solderability  
∆R/R (1% + 0.05Ω)  
After dipping at 260°C 5°C for 10 seconds, resistance change to be within specification, with no evidence of  
arcing, burning or charring. Terminations shall maintain a minimum of 75% coverage following the procedures of  
MIL-STD-202E.  
Load Life  
∆R/R (2% + 0.05Ω)  
After 1000 hours application of the rated voltage with a duty cycle of 11/2 hours ON and 1/2 hour OFF, at  
70°C. Resistance change to be within specification, with no evidence of arcing, burning or charring.  
∆R/R (2% + 0.05Ω)  
Moisture Load  
After 1000 hours application of the rated voltage with a duty cycle of 11/2 hours ON and 1/2 hour OFF, at  
40°C and 90-95% RH. Resistance change to be within specification, with no evidence of arcing, burning  
or charring.  
Voltage Coefficient  
Flammability  
∆R/R < 100ppm/V  
Product is conformally coated with epoxy resin conforming to UL94V-0.  
SIL PIN-OUTS  
Common (E)  
Common parts are characterised by having a number of resistive  
elements, all of the same nominal value. All elements are connected to pin 1.  
6
7
2
3
4
5
8
n-1  
1
n = Number of pins  
Isolated (M)  
Isolated parts are characterised by having a number of resistive  
elements, all of the same nominal value. All elements are independent.  
n
4
2
3
n-1  
1
6
5
n = Number of pins  
136  
Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758