EL5485C, EL5486C - Preliminary
EL5485C, EL5486C - Preliminary
Quad 4ns High Speed Comparators
Features
•
•
•
•
•
•
•
•
•
•
•
4ns typ. propagation delay
5V to 12V input supply
+2.7V to +5V output supply
True-to-ground input
Rail-to-rail outputs
Separate analog and digital
supplies
Active low latch
Single (EL5185C) available
Dual (EL5285C) available
Window available (EL5287C)
Pin-compatible 8ns family
available (EL5x81C, EL5283C &
EL5482C)
General Description
The EL5485C and EL5486C comparators are designed for operation
in single supply and dual supply applications with 5V to 12V between
V
S
+ and V
S
-. For single supplies, the inputs can operate from 0.1V
below ground for use in ground sensing applications.
The output side of the comparators can be supplied from a single sup-
ply of 2.7V to 5V. The rail-to-rail output swing enables direct
connection of the comparator to both CMOS and TTL logic circuits.
The latch input of the EL5485C and EL5486C can be used to hold the
comparator output value by applying a low logic level to the pin.
The EL5485C is available in the 16-pin SO package and the EL5486C
in the 24-pin QSOP package. Both are specified for operation over the
full -40°C to +85°C temperature range. Also available are single
(EL5185C), dual (EL5285C), and window comparator (EL5287C)
versions.
Applications
•
•
•
•
•
•
Threshold detection
High speed sampling circuits
High speed triggers
Line receivers
PWM circuits
High speed V/F converters
Pin Configurations
INA- 1
INA+ 2
NC 3
GND 4
INA- 1
INA+ 2
GND 3
OUTA 4
OUTB 5
VS- 6
INB+ 7
INB- 8
EL5485CS
(16-Pin SO)
+
-
-
+
16 IND-
15 IND+
14 VS+
13 OUTD
12 OUTC
11 VSD
10 INC+
9 INC-
LATCHA 5
OUTA 6
OUTB 7
LATCHB 8
VS- 9
NC 10
INB+ 11
INB- 12
EL5486CU
(24-Pin QSOP)
+
-
-
+
24 IND-
23 IND+
22 NC
21 VS+
20 LATCHD
19 OUTD
18 OUTC
17 LATCHC
16 VSD
15 NC
Ordering Information
Part No
EL5485CS
EL5485CS-T7
EL5485CS-T13
EL5486CU
EL5486CU-T13
Package
16-Pin SO
16-Pin SO
16-Pin SO
24-Pin QSOP
24-Pin QSOP
Tape & Reel
-
7”
13”
-
13”
Outline #
MDP0027
MDP0027
MDP0027
MDP0040
MDP0040
+
-
-
+
+
-
-
+
September 7, 2001
14 INC+
13 INC-
Note:
All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.