欢迎访问ic37.com |
会员登录 免费注册
发布采购

EL6263CU 参数 Datasheet PDF下载

EL6263CU图片预览
型号: EL6263CU
PDF下载: 下载PDF文件 查看货源
内容描述: 四为20MHz和70MHz的四,开关增益前置放大器 [Quad 20MHz & Quad 70MHz, Switched Gain Pre-Amp]
分类和应用: 开关放大器
文件页数/大小: 2 页 / 141 K
品牌: ELANTEC [ ELANTEC SEMICONDUCTOR ]
 浏览型号EL6263CU的Datasheet PDF文件第2页  
EL6263C - Product Brief
EL6263C - Product Brief
Quad 20MHz & Quad 70MHz, Switched Gain Pre-Amp
Features
• Autozero of output offset to
<10mV
• 3 selectable gains
• Space-saving QSOP-24 package
• Differential Sum & Sum-Bar
outputs
• Single 5V supply
General Description
The EL6263C consists of four 30MHz trans-impedance amplifiers and
four 70MHz trans-impedance amplifiers. The four 70MHz amplifier
outputs also are averaged to provide differential 70MHz outputs.
The EL6263C is designed to amplify the photodiode currents for CD,
DVD, or other photodiode pick-up applications.
Two TTL/CMOS-compatible select the gains for all eight amplifiers.
The gain settings for the fast amplifiers are 5.4kΩ, 10.7kΩ, and
28.6kΩ. The gain settings for the slow amplifiers are 13.3kΩ, 25kΩ,
and 66.7kΩ. The gain settings for the sum and sumbar outputs are
7.6kΩ, 14.3kΩ, and 38.1kΩ measured single-ended. Gain matching is
typically 3% channel to channel. The autozero input reduces each
amplifier’s output offset to less than 10mV when it goes high. The AZ
pin is TTL/CMOS-compatible.
The E, F, G, and H channel bandwidths are 30MHz for all gains and
reasonable input and output loads. The A, B, C, D, S, and S channels
have bandwidths of 70MHz, 46MHz, and 40MHz at low, middle, and
high gains respectively after driving 25cm of flex circuit.
Outline #
MDP0040
Applications
DVD RAM, RW, and ROM
CD RW, R and ROM
MO drives
Optical Pickup pre-amplifier
Servo positioning systems
High speed instrumentation
Ordering Information
Part No
EL6263CU
Package
24-Pin QSOP
Tape & Reel
Each amplifier output can typically sink or source up to 5mA and their
outputs can swing 1V
P-P
at full bandwidth.
The EL6263C operates from a single +5V supply and is available in
QSOP-24 package. It is specified for operation from -0°C to 70°C.
Connection Diagram
GAIN 0 SELECT 1
GAIN 1 SELECT 2
REF INPUT 3
A INPUT 4
B INPUT 5
C INPUT 6
D INPUT 7
0V (VSS) 8
E INPUT 9
F INPUT 10
G INPUT 11
H INPUT 12
24 AZ INPUT
23 SUM OUTPUT
22 SUM OUTPUT
21 A OUTPUT
20 B OUTPUT
19 C OUTPUT
18 D OUTPUT
October 12, 2000
17 +5V (VDD)
16 E OUTPUT
15 F OUTPUT
14 G OUTPUT
13 H OUTPUT
Note:
All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.