ELM185xB
Laser Diode Driver
■General description
ELM185xB is a bipolar type laser diode driver IC with internal APC circuit which consists of a reference
voltage source, an error amplifier, and a thermal shutdown circuit for protection. With reference voltage source,
the output of laser is comparatively stable during the change of power voltage and temperature. With its small
package, ELM185xB is possible to be assembled within small areas on the board. When control loop damage
occurs, ELM185xB is also capable of limiting the laser drive current; limited current value can be adjusted by
an external resister on ILM. KLD output drive current can reach up to 400mA (max.). For avoidance of damage
of laser diode, the Zener diode which is included in ELM185xB is able to absorb 8V surge between VCC-GND.
ELM185xB is able to drive various types of laser diode modules (LDM); please refer to applicable laser
diode modules for further information. ELM185xB can not only drive laser diode by APC control, but also
by constant current with internal constant current setup function; therefore, ELM185xB can also be used as
constant current driver for laser diode, high luminous LED, etc.
■Features
•
•
•
•
•
•
•
Low voltage operation
: 2.0V
Low current consumption operation : Typ.1mA
Laser drive current
: Max.400mA
Internal voltage reference
: Typ.0.30V
Thermal shutdown circuit
: Typ.150°C
Package
: SOT-26, VSON6-2x2
Zener diode for surge absorption included
■Application
• Driver for laser diode in laser pointer, laser level, etc.
• Driver for constant load current such as LED, etc.
■Maximum absolute ratings
Parameter
Operation voltage
CMP voltage
ILM voltage
KLD voltage
AMD voltage
KLD current
Power dissipation
Operation temperature
Storage temperature
Symbol
VCC
Vcmp
Vilm
Vkld
Vamd
Ikld
Pd
Top
Tstg
Limit
GND-0.3 to 7.0
GND-0.3 to 7.0
GND-0.3 to 7.0
GND-0.3 to 18.0
GND-0.3 to VCC+0.3
500
300 (SOT-26)
1000 (VSON6-2x2)
-30 to +85
-40 to +125
Unit
V
V
V
V
V
mA
mW
°C
°C
10 - 1