EM91215 SERIES
TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
SAVE redial memory
The SAVE meomry is designed in EM91215 series to support 32 digits capacity buffer for second redial,
pager, Memory and other system applications.
Storing
: EM91215 series support two operating methods to store numbers into SAVE redial memory.
Method 1
• To select Pulse or Tone mode.
• Off-hook (or turn on HF function), push
d1, d2,
.. ,
dn.
The numbers d1, d2, .. , dn will be dialed out in Pulse
or Tone mode as selection.
• After dn had been dialed out and push
[ST],
Save key. If the keying numbers are more than 32 digits that
content of SAVE memory can not be updated. Otherwise, these numbers will be stored into SAVE memory.
In the [] key allows to be omitted.
Method 2
Off-hook (or turn on HF function), push
ST, d1, d2,
.. , dn,
[ST], Save.
If the keying numbers are not over 32
digits, the numbers d1, d2, .. , dn will be stored in SAVE redial memory automatically.
Dialing :
• To select Pulse or Tone mode.
• Off-hook (or turn on HF function), push Save key. The numbers stored in SAVE memory will be dialed out
in Pulse or Tone mode as selection.
Repertory memory
The EM91215 series incorporated several sets repertory memory and each one can store number up to 16 digits.
These memories were designed to 13 sets types. As operating precedure, all of the memories can be separated
to dirtect (one-touch) and indirect (two-touch ) operation. In memory storing, if stored numbers are more than
16 digits that only the previous 16 digits can be stored into specific memory. Otherwise, these numbers can be
stored entirely. After memory dialed out, the content of LNB is keeping to current data.
Storing of 13 sets memory types
Direct (one-touch) operation
Off-hook (or turn on HF function), push
ST, d1, d2, .. , dn [ST], EMn or M1~M10 (ROW5 optioned).
The
numbers d1, d2, .. , dn will be stored into memory location “EMn”. The “EMn” expressed emergency memory
EM1 to EM3.
Indirect (two-touch) operation
Off-hook (or turn on HF function), push
ST, d1, d2, .. , dn, ST, n.
The numbers d1, d2, .. , dn will be stored
into memory location “n”. The “n” expressed digital key from 0 to 9.
Dialing
(after memory dialed out, the content of LNB is keeping to current data)
Direct (one-touch) memory operation
• To select Pulse or Tone mode.
• Off-hook (or Turn on HF function), push
Mn
(or
EMn)
key. The numbers that are stored in direct memory
location “Mn (or EMn)” will be dialed out in Pulse or Tone mode as selection. The “n” expressed digital
* This specification are subject to be changed without notice.
10.1.1997
5
EMC [ ELAN MICROELECTRONICS CORP ]
