EM91455B 参数 Datasheet PDF下载

EM91455 SERIES

TONE/PULSE DIALER WITH LCD INTERFACE

AND I.P.P. DETECT FUNCTION

Redialing:

After normal dialing, directly keying F key (or On-Off hook once) and keying RD key on keyboard. The

numbers that are stored into LNB memory will be dialed output.

Repertory memory

The EM91455 series incorporated several sets repertory memory and each one can store number up to 16 digits.

These memories were designed to 3 sets types. In memory storing, if stored numbers are more than 16 digits

that only the previous 16 digits can be stored into specific memory. Otherwise, these numbers can be stored

entirely. After memory dialed out, the content of LNB is keeping to current data.

Storing of 3 sets memory

Direct (one-touch) operation

Off-hook (or turn on HF function), push

(ST, d1, d2, .. , dn [ST], EMn

The numbers d1, d2, .. , dn will be stored

into memory location “EMn”. The “EMn” expressed emergency memory EM1 to EM3.

Dialing

(after memory dialed out, the content of LNB is keeping to current data)

Direct (one-touch) memory operation

• To select Pulse or Tone mode.

• Off-hook (or Turn on HF function), push “EMn” key. The numbers that are stored in direct memory location

“EMn” will be dialed out in Pulse or Tone mode as selection. The “n” expressed digital number from 1~3.

Pause (P) key operation

The Pause (P) key is designed to support pause operation in dialing duration. “P” key can be stored in memory

and it will occupy one digital position.

• To select Pulse or Tone mode.

• Off-hook (or turn on HF function), push

(d1, d2, .. , dn, RD/P, k1, k2, .. , kn.)

These numbers will be dialed

out as following sequence:

d1, d2, .. , dn, Tp, k1, k2, .. , kn.

Pulse to Tone (*/T) key operation

The Pulse to Tone (*/T) key is designed to support toll dialing (long distance call) or PABX system operation.

The “*/T” key can be stored in memory and it will occupy one digital position.

• To select Pulse mode.

• Off-hook (or turn on HF function), push d1, d2, .. , dn, */T, k1, k2, .. , kn. These numbers will be dialed out

as following sequence:

d1, d2, .. , dn, Tpt, k1, k2, .. , kn.

(pulse mode)

(tone mode)

* This specification are subject to be changed without notice.

9.24.1998

6