Embedded Power for
Business-Critical Continuity
LPX50 Enclosure
(2X)M3 INSERT
Rev. 02.16.09_159
LPX50 Enclosure
1 of 2
0.980
Installation Notes
[ 24,9 ]
0.802
[
LPX50 • Cover Enclosure Kit
20,4
]
LPX50 will fit the LPX5X and LPX10X-M power
supplies.
OUTPUT TERMINALS
INPUT TERMINALS
2.945
[ 74,8 ]
1.457
[ 37,0 ]
INSULATOR
4.685
[ 119,0
]
Materials
1.693
[ 43,0 ]
(2X)
(2X)
(2X)
A
• 1 Base
• 1 Cover
2.677
[ 68,0 ]
(2X)
GROUND STUD
• 4 M3x6mm Pan head
0.591 ]
[ 15,0
screws with spring washer
ÿ0.35(ÿ8.8)
ÿ0.14(ÿ3.6)
3.727
[ 94,7 ]
• 4 M3x6mm countersunk
Installation Instructions and Notes
2.283
screws
[ 58,0 ]
0.25(6.4)
1. Place the insulator over the chassis as shown.
• 1 M4 nut
(2X) KEYWAY DETAIL
2. Place the power supply over the insulator as shown.
• 1 M4 star washer
3. Align the 4x power supply to the chassis standoff.
A
• 1 M4 spring washer
4. Secure 4 pan head screws with washer provided with in kit as shown.
• 1 Plastic insulator sheet
5. Place the cover over the power supply as shown.
2.205
1.724
[ 43,8 ]
[ 56,0 ]
A
(4X)STANDOFF
A
(4X)M3 INSERT
MARKED"A"
6.
7.
8.
9.
SEE KEYWAY DETAILS
Align the 4x cover to the U-bracket countersink holes.
Secure 4 countersink screws provided with in kit as shown.
Overall dimensions: 4.685 (119.0) x 2.945 (74.8) x 1.693 (43.0).
Base plate has three sets of customer mountings:
a. Bottom mounting (4X) M3 inserts. Max. screw penetration 0.0787 (2mm)
b. Side mounting (2X) 4mm clear holes plus 2 keyways. (See keyway detail)
c. Side mounting (4X) M3 inserts. Max. screw penetration 0.236 (6mm)
NOTES
10. Ensure insulator is correctly fitted in base under PCB to maintain safety creepage
1. All dimensions are in inches(mm)
MATERIALS
and clearances.
2. Overall dimensions
4.685(119.0) x 2.945(74.8) x 1.693(43.0)
1 Base
3. Base plate
earth
of customer mountings:
11. Ensure base
1 Cover
is firmly connected to supply earth via the
has three sets
stud marked
a. Bottom mounting(4X)M3 inserts. Max. screw penetration 0.0787(2mm)
4 M3X6mm Pan head screws with spring washer
b. Bottom mounting(2X)4mm clear holes plus 2 keyways.(see keyway detail)
12. When using
4 M3X6mm Countersunk screws
ensure that relevant safety standards (e.g. EN60950) are complied
this enclosure,
c. Side mountings(4X)M3 inserts. Max. screw penetration 0.236(6mm)
1 M4 nut
with, in
M4 star washer
to creepage and clearance
4.
distances, and distances through insulation.
Ensure insulator is correctly fitted in base under PCBto maintain safety
1
respect
creepage and clearances.
1 M4 spring washer
6. When using this enclosure, ensure that relevant safety standards
13. All dimensions are in
sheet
1 Plastic insulator
inches (mm)
(e.g.,EN60950)are complied with, in respect to creepage and clearance
distances, and distances through insulation.
EMERSON-NETWORKPOWER [ EMERSON NETWORK POWER ]
