NLP25 Series
OUTPUT
POWER
20.8 W
OUTPUT
VOLTAGE
+5 V (I
A
)
+12 V (I
B
)
–12 V (I
C
)
20.1 W
+5 V (I
A
)
+12 V (I
B
)
–5 V (I
C
)
19.6 W
+5 V (I
A
)
+12 V (I
B
)
25 W
25 W
25 W
25 W
Notes
+5 V
+12 V
+24 V
+48 V
MIN
(3)
Single, dual and triple output
LOW TO MEDIUM POWER AC/DC POWER SUPPLIES
20-25 W AC/DC Universal Input Switch Mode Power Supplies
2
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
OUTPUT CURRENT
RIPPLE
MAX
2A
0.8 A
0.1 A
2A
0.8 A
0.1 A
2A
0.8 A
5A
2.08 A
1.04 A
0.52 A
PEAK
(1)
(2)
OVP
THRESHOLD
(5)
TOTAL
REGULATION
±2.0%
±5.0%
±5.0%
(3)
MODEL
NUMBER
(9,10,11)
0.2 A
0.1 A
0A
0.2 A
0.1 A
0A
0.2 A
0.1 A
0A
0A
0A
0A
2.5 A
1.2 A
0.15 A
2.5 A
1.2 A
0.15 A
2.5 A
1.2 A
6A
2.5 A
1.25 A
0.6 A
50 mV
120 mV
50 mV
50 mV
120 mV
50 mV
50 mV
120 mV
50 mV
120 mV
150 mV
150 mV
5.6-6.9 V
NLP25-7608J
5.6-6.9 V
±2.0%
±5.0%
±5.0%
NLP25-7607J
5.6-6.9 V
±2.0%
±5.0%
NLP25-7629J
5.6-6.9 V
14-16.7 V
29-34.2 V
55-60 V
±2.0%
±2.0%
±2.0%
±2.0%
NLP25-7605J
NLP25-7612J
NLP25-7624J
NLP25-7617J
OUTPUT PIN CONNECTIONS
J2
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
SINGLE
V (A)
Return
V (A)
Return
V (A)
DUAL
No Connection
Return
V (A)
Return
V (B)
TRIPLE
V (C)
Return
V (A)
Return
V (B)
Peak output current lasting less than 60 seconds with duty cycle less than
5.0%. During peak loading, output voltage may exceed total regulation
limits.
2
20 MHz bandwidth, peak to peak, measured differentially with a 12 inch
twisted pair of number 16 AWG copper wire, terminated with a 47 µF
capacitor of proper polarity and voltage rating.
3
Total regulation is defined as the static output regulation at 25 ºC, including
initial tolerance, line voltage within stated limit, load current within stated
limit, and output voltage adjusted to their factory settings. To achieve
specified regulation on multiple output models, minimum loads are required
on V(A) and V(B) as outlined in above table.
4
To maintain user-system safety approvals, the input power cable must be
appropriately rated and approved.
5
Main output voltage is protected by a Zener diode.
6
Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G
rms 5 Hz to 500 Hz.
7
CAUTION: Allow a minimum of 5 seconds after disconnecting line power
when making thermal measurements.
8
This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
9
All models of the NLP25 series are floating output except for the NLP25-
7612J unit. The NLP25-7612J unit has its 0 Vdc output (return on J2 pins
2 and 4) directly connected to the incoming earth/ac ground. For the NLP-
7612J floating output please consult Artesyn Technologies.
10
The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.
TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
11
NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool at
http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
1
INPUT
PIN CONNECTIONS
J1
Pin 1
Pin 3
Pin 5
AC Ground
AC Line
AC Neutral
File Name: NLP25.PDF Rev (02): 08 Nov 2005