Embedded Power for
Business-Critical Continuity
Specifications
All specifications are typical at nominal input Vin = 12 V, full load at 25
°
C unless otherwise stated.
Rev.06.25.07
SMT15C
3 of 4
OUTPUT
POWER
(MAX.)
50 W
75 W
INPUT
VOLTAGE
4.5-5.5 Vdc
10.2-13.8 Vdc
OUTPUT
VOLTAGE
0.9-3.3 Vdc
0.9-5.0 Vdc
OUTPUT
CURRENT
(MIN.)
0A
0A
OUTPUT
CURRENT
(MAX.)
15 A
15 A
EFFICIENCY
(TYP.)
89%
91%
REGULATION
LINE
±0.2%
±0.2%
LOAD
±0.5%
±0.5%
MODEL
NUMBER
(12,13)
SMT15C-05SADJJ
SMT15C-12SADJJ
Part Number System with Options
SMT15C-12SADJJ
Packaging Options
(12)
J = Pb-free (RoHS 6/6 compliant)
Product Family
SMT = Surface Mount
Rated Output Current
15 = 15 A
Performance
C = Cost Optimized
Number of Outputs
SADJ = Single Adjustable Output
Input Voltage
05 = 4.5 Vdc to 5.5 Vdc
12 = 10.2 Vdc to 13.8 Vdc
Output Voltage Adjustment of the SMT15C Series
The ultra-wide output voltage trim range offers major advantages to users who
select the SMT15C series. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SMT15C series converter
leaves the factory the output has been adjusted to the default voltage of 0.9 V.
Notes
1
2
3
4
5
6
7
8
9
10
11
12
13
di/dt = 10 A/μs, Vin = Nom, Tc = 25
º
C, load change = 0.50 lo max. to 0.75 lo
max, and vice versa.
Measured with external filter. See Application Note 169 for details.
Power up is the time from application of dc input to POWER GOOD high.
Remote ON/OFF asserted high to POWER GOOD high.
This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
Reserved.
Measured as per recommended set-up. Cin = 270 μF (20m
W
ESR max.), Cout
= 680 μF (10 m
W
ESR max.).
Uses external resistor from TRIM to ground. See Application Note 169 for
details. Minimum value 485 μF for 5 V model, 280 μF for 12 V model.
Signal line assumed <3 m in length.
External input fusing recommended.
See Application Note 169 for operation above 50
º
C.
See Application Note 169 for more details.
TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special
request, please contact your local sales representative for details.
NOTICE: Some models do not support all options. Please contact your local
Artesyn representative or use the on-line model number search tool at
http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
Ripple and Noise Specification
Model
5 V input models
12 V input models
Output
Voltage
0.9 Vdc to 2.5 Vdc
3.3 Vdc
0.9 Vdc to 2.5 Vdc
3.3 Vdc to 5 Vdc
Pk - Pk
30 mV
40 mV
50 mV
50 mV
RMS
15 mV
15 mV
25 mV
25 mV
EMERSON-NETWORKPOWER [ EMERSON NETWORK POWER ]
