R
EM4102
Memory Array for PSK encoding ICs
The PSK coded IC's are programmed with odd parity for
P0 and P1 and always with a logic zero.
The parity bits from P2 to P9 are even.
The column parity PC0 to PC3 are calculated including
the version bits and are even parity bits.
Code Description
Manchester
There is always a transition from ON to OFF or from OFF
to ON in the middle of bit period. At the transition from
logic bit “1” to logic bit “0” or logic bit “0” to logic bit “1” the
phase change. Value high of data stream presented
below modulator switch OFF, low represents switch ON
(see Fig. 6).
Biphase Code
At the beginning of each bit, a transition will occur. A logic
bit “1” will keep its state for the whole bit duration and a
logic bit “0” will show a transition in the middle of the bit
duration (see Fig. 7).
PSK Code
Modulation switch goes ON and OFF alternately every
period of carrier frequency. When a phase shift occurs, a
logical "0" is read from the memory. If no shift phase
occurs after a data rate cycle, a logical "1" is read (see
Fig. 8).
Manchester Code
Binary data
Memory output
Modulator control
X
1
1
1
1
1
1
1
1
1
0
1
0
1
0
0
0
1
1
0
Modulation control "low" means high current
Fig. 6
Biphase Code
0
1
1
0
1
0
0
1
Binary data
Memory output
Modulator control
Modulation control "low" means high current
Fig. 7
PSK Code
Serial Data Out
COIL1
Modulator control
"0" ON SERIAL OUT
"1" ON SERIAL OUT
Modulation control "low" means high current
Fig. 8
Copyright © 2005, EM Microelectronic-Marin SA
5
www.emmicroelectronic.com
EMMICRO [ EM MICROELECTRONIC - MARIN SA ]
