EM47FM3288SBB
16Gb (64M×8Bank×32) Double DATA RATE 3 Stack SDRAM
Features
• JEDEC Standard VDD/VDDQ = 1.5V±0.075V.
• All inputs and outputs are compatible with SSTL_15
interface.
• Fully differential clock inputs (CK, /CK) operation.
• Eight Banks
• Posted CAS by programmable additive latency
• Bust length: 4 with Burst Chop (BC) and 8.
• CAS Write Latency (CWL): 5,6,7,8
• CAS Latency (CL): 6,7,8,9,10,11
• Write Latency (WL) =Read Latency (RL) -1.
• Bi-directional Differential Data Strobe (DQS).
• Data inputs on DQS centers when write.
• Data outputs on DQS, /DQS edges when read.
• On chip DLL align DQ, DQS and /DQS transition
with CK transition.
• DM mask write data-in at the both rising and falling
edges of the data strobe.
• Sequential & Interleaved Burst type available both
for 8 & 4 with BC.
• Multi Purpose Register (MPR) for pre-defined
pattern read out
• On Die Termination (ODT) options: Synchronous
ODT, Dynamic ODT, and Asynchronous ODT
• Auto Refresh and Self Refresh
• 8,192 Refresh Cycles / 64ms
• Refresh Interval: 7.8us T
case
between 0°C ~ 85°C
• Refresh Interval: 3.9us T
case
between 85°C ~ 95°C
• RoHS Compliance
• Driver Strength:RZQ/7, RZQ/6 (RZQ=240Ω)
• High Temperature Self-Refresh rate enable
• ZQ calibration for DQ drive and ODT
• RESET pin for initialization and reset function
Description
The EM47FM3288SBB is a high speed stack
multi-chip package integrated 4Gbits x4 DDR3
SDRAM and fabricated with ultra high performance
CMOS process containing 16G bits which organized
as 64Mbits x 8 banks by 32 bits. This synchronous
device achieves high speed double-data-rate transfer
rates of up to 1600 Mb/sec/pin (DDR3-1600) for
general applications. The chip is designed to comply
with the following key DDR3 SDRAM features: (1)
posted CAS with additive latency, (2) write latency =
read latency -1, (3) On Die Termination (4)
programmable driver strength data,(5) seamless BL4
access. All of the control and address inputs are
synchronized with a pair of externally supplied
differential clocks. Inputs are latched at the cross
point of differential clocks (CK rising and /CK falling).
All I/Os are synchronized with a pair of bidirectional
differential data strobes (DQS and /DQS) in a source
synchronous fashion. The address bus is used to
convey row, column and bank address information in
a /RAS and /CAS multiplexing style. The 16Gb DDR3
devices operates with a single power supply: 1.5V ±
0.075V VDD and VDDQ. Available package with
RoHS compliance: FBGA-168Ball (14 x 12 x 1.4
mm
3
)
Jul. 2012
1/41
EOREX [ EOREX CORPORATION ]
