Page 9
Assembly of Boards
10) Plug the bottom 2x10 receptacles of
S5U13781M00C100 Board A
to the Stellaris LM4F120
Launchpad 2x10 headers. Make sure the pin 1s of P1-P4 of
S5U13781M00C100 Board A
line
up with pin1s of J1-J4 of the Stellaris LM4F120 Launchpad.
11) Plug the bottom headers (J4, J5) of
S5U13781R00C100 Main Board
to the top side receptacles
(P5, P9) of
S5U13781M00C100 Board A.
Make sure the pin 1s of J4 and J5 of the
S5U13781R00C100 Main Board
line up with the pin1s of P5 and P9 of
S5U13781M00C100
Board A.
12) Plug the 2x25 receptacle (PB1/PC1) of
S5U13781M00C100 Board B/C
to J2 (2x25 header) on
the bottom side of
S5U13781M00C100 Board A.
Make sure pin 1 of J2 of
S5U13781M00C100
Board A
lines up with pin 1 of PB1/PC1 of
S5U13781M00C100 Board B/C.
13) Plug the bottom headers (J9, J10) of the
S5U13781R00C100 LCD Interface Board
to the top
side receptacles (PB2/PC2, PC3) of
S5U13781M00C100 Board B/C.
14) Connect the LCD module’s FPC to J8 of the
S5U13781R00C100 LCD Interface Board.
Make
sure the pads/contacts side of the FPC are facing down and pin 1 of the FPC lines up with the pin
1 edge of J8 (please refer to Figure 4).
X94A-G-008-01
Issue Date: 2012/09/25
Seiko Epson Corporation
S5U13781R00C10M User Manual
Revision 1.0