ESMT
Flash
FEATURES
Single supply voltage 2.7~3.6V
Standard, Dual SPI
Speed
- Read max frequency: 33MHz
- Fast Read max frequency: 50MHz; 100MHz
- Fast Read Dual max frequency: 50MHz / 100MHz
(100MHz / 200MHz equivalent Dual SPI)
Low power consumption
- Active current: 35 mA
- Standby current: 30
μ
A
Reliability
- 100,000 typical program/erase cycles
- 20 years Data Retention
Program
- Byte programming time: 7
μ
s (typical)
- Page programming time: 1.5 ms (typical)
Erase
- Chip erase time 10 sec (typical)
- Block erase time 1 sec (typical)
- Sector erase time 90 ms (typical)
Page Programming
- 256 byte per programmable page
F25L08PA
3V Only 8 Mbit Serial Flash Memory with Dual
Auto Address Increment (AAI) WORD Programming
- Decrease total chip programming time over
Byte Program operations
Lockable 4K bytes OTP security sector
SPI Serial Interface
- SPI Compatible: Mode 0 and Mode 3
End of program or erase detection
Write Protect (
WP
)
Hold Pin ( HOLD )
All Pb-free products are RoHS-Compliant
ORDERING INFORMATION
Product ID
F25L08PA –50PG
F25L08PA –100PG
F25L08PA –50PAG
F25L08PA –100PAG
F25L08PA –50DG
F25L08PA –100DG
Speed
50MHz
100MHz
50MHz
100MHz
50MHz
100MHz
Package
8 lead SOIC
8 lead SOIC
8 lead SOIC
8 lead SOIC
8 lead PDIP
8 lead PDIP
150mil
150mil
200mil
200mil
300mil
300mil
COMMENTS
Pb-free
Pb-free
Pb-free
Pb-free
Pb-free
Pb-free
GENERAL DESCRIPTION
The F25L08PA is a 8Megabit, 3V only CMOS Serial Flash
memory device. The device supports the standard Serial
Peripheral Interface (SPI), and a Dual SPI. ESMT’s memory
devices reliably store memory data even after 100,000
programming and erase cycles.
The memory array can be organized into 4,096 programmable
pages of 256 byte each. 1 to 256 byte can be programmed at a
time with the Page Program instruction. The device also can be
programmed to decrease total chip programming time with Auto
Address Increment (AAI) programming.
The device features sector erase architecture. The memory array
is divided into 256 uniform sectors with 4K byte each; 16 uniform
blocks with 64K byte each. Sectors can be erased individually
without affecting the data in other sectors. Blocks can be erased
individually without affecting the data in other blocks. Whole chip
erase capabilities provide the flexibility to revise the data in the
device. The device has Sector, Block or Chip Erase but no page
erase.
The sector protect/unprotect feature disables both program and
erase operations in any combination of the sectors of the
memory.
Elite Semiconductor Memory Technology Inc.
Publication Date:
Jul. 2009
Revision: 1.7
1/32
ESMT [ ELITE SEMICONDUCTOR MEMORY TECHNOLOGY INC. ]
