ESMT
Burst
Length
2
Preliminary
Burst Address Ordering for Burst Length
Starting
Address (A2, A1,A0)
xx0
xx1
x00
x01
x10
x11
000
001
010
011
100
101
110
111
Sequential Mode
0, 1
1, 0
0, 1, 2, 3
1, 2, 3, 0
2, 3, 0, 1
3, 0, 1, 2
0, 1, 2, 3, 4, 5, 6, 7
1, 2, 3, 4, 5, 6, 7, 0
2, 3, 4, 5, 6, 7, 0, 1
3, 4, 5, 6, 7, 0, 1, 2
4, 5, 6, 7, 0, 1, 2, 3
5, 6, 7, 0, 1, 2, 3, 4
6, 7, 0, 1, 2, 3, 4, 5
7, 0, 1, 2, 3, 4, 5, 6
M13S64164A
Interleave Mode
0, 1
1, 0
0, 1, 2, 3
1, 0, 3, 2
2, 3, 0, 1
3, 2, 1, 0
0, 1, 2, 3, 4, 5, 6, 7
1, 0, 3, 2, 5, 4, 7, 6
2, 3, 0, 1, 6, 7, 4, 5
3, 2, 1, 0, 7, 6, 5, 4
4, 5, 6, 7, 0, 1, 2, 3
5, 4, 7, 6, 1, 0, 3, 2
6, 7, 4, 5, 2, 3, 0, 1
7, 6, 5, 4, 3, 2, 1, 0
4
8
DLL Enable / Disable
The DLL must be enabled for normal operation. DLL enable is required during power-up initialization, and upon returning to
normal operation after having disabled the DLL for the purpose of debug or evaluation (upon exiting Self Refresh Mode, the DLL is
enable automatically). Any time the DLL is enabled, 200 clock cycles must occur before a READ command can be issued.
Output Drive Strength
The normal drive strength for all outputs is specified to be SSTL_2, Class II. M13S64164A also support a weak drive strength
option, intended for lighter load and/or point-to-point environments.
Mode Register Set
0
CLK
CLK
*1
1
2
3
4
5
6
7
8
COMMAND
Precharg e
Al l Ba n k s
Mod e
Register Set
An y
Com m an d
t
CK
t
R P
* 2
*1 : MRS can be issued only at all banks precharge state.
*2 : Minimum t
RP
is required to issue MRS command.
Elite Semiconductor Memory Technology Inc.
Publication Date : Jul. 2007
Revision : 0.3
12/49
ESMT [ ELITE SEMICONDUCTOR MEMORY TECHNOLOGY INC. ]
