EUP8054/8054X
Pin Configurations
Package Type
Pin
Configurations
TSOT-25
TDFN-6
Pin Description
PIN
TSOT-25
TDFN6
DESCRIPTION
CHRG
GND
BAT
V
CC
PROG
N/C
1
2
3
4
5
1
2
6
4
3
5
Open-Drain Status Output
Ground
Charge Current Output
Positive Input Supply Voltage
Charge Current Program, Charge Current Monitor and Shutdown Pin.
No connection
Pin Functions
CHRG :
Open-Drain Charge Status Output. When the battery is charging, the
CHRG pin is pulled low by an
internal N-channel MOSFET. When the charge cycle is completed, a weak pull-down of approximately 12µA is
connected to the CHRG pin, indicating a “AC present” condition. When the EUP8054 detects an undervoltage
lockout condition, CHRG is forced high impedance.
GND :
Ground.
BAT :
Charge Current Output. Provides charge current to the battery and regulates the final float voltage to 4.2V.
An internal precision resistor divider from this pin sets the float voltage which is disconnected in shutdown
mode.
V
CC
:
Positive Input Supply Voltage. Provides power to the charger. V
CC
can range from 4.35V to 6.5V and
should be bypassed with at least a 1µF capacitor. When V
CC
drops to within 30mV of the BAT pin voltage, the
EUP8054 enters shutdown mode, dropping IBAT to less than 2µA.
DS8054
Ver1.1
Jan. 2007
3