EVERLIGHT ELECTRONICS CO., LTD.
65-21/Y2C-CJ2L2X/3T
5. Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Everlight Electronics Co., Ltd.
Device No.: DSE-651-277
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Rev. 1
Page: 10 of 10
http://www.everlight.com
Prepared date: 24-Apr-2007
Prepared by: Josh Chou