欢迎访问ic37.com |
会员登录 免费注册
发布采购

IR201 参数 Datasheet PDF下载

IR201图片预览
型号: IR201
PDF下载: 下载PDF文件 查看货源
内容描述: 掌上红外测温仪 [Pocket InfraRed Thermometer]
分类和应用:
文件页数/大小: 1 页 / 177 K
品牌: EXTECH [ EXTECH INSTRUMENTS CORPORATION. ]
   
User's Manual
Measure
Pocket InfraRed Thermometer
Model IR201
Introduction
Congratulations on your purchase of Extech’s IR201 Pocket InfraRed Thermometer. This device
allows the user to take non-contact temperature measurements simply by pointing the meter and
pressing a button. This meter, with proper care, will provide years of safe reliable service.
MAX
Laser
LCD
Specifications
General Specifications
Display
Power off
Laser power
Operating Temperature
Operating Humidity
Power Supply
Weight
Size
3 �½ -digit (2000 count) LCD display
Automatic shutoff after approx. 8 seconds
Laser power less than 1mW (red)
32 to 122°F (0 to 50°C)
Max. 80% RH
2 x AAA battery
2.7 oz. / 76g
3.7 x 2 x 1" (94 x 51 x 25 mm)
Range Specifications
o
o
Ranges(Resolution) -58 to 518 F/ -50 to 270°C (1 F/1°C)
-4º to 518ºF / -20 to 270ºC:
± (2.5% of reading + 3ºF or 2ºC)
Accuracy
-58º to -4ºF / -50 to -20ºC:
: ± 10ºF or 5ºC
Recommended
2” to 36” / 5cm to 91cm
measuring distance
Emissivity settings
0.95 fixed
Distance to Target
6:1
Ratio
IR Measurements
Taking Measurements
Point the meter toward the object being measured, then press and
hold the MEASURE button. The meter will turn ON and take a reading.
Read the measured temperature on the LCD. The meter turns off
automatically approximately 8 seconds after the MEASURE button is
released.
While pressing the MEASURE button:
Press the LASER button to turn on the laser pointer.
Press the MAX button to display and hold the highest reading. The
display will update with each higher reading.
The object being measured should be larger than the spot size as
illustrated in the distance to spot diagram.
Measurement considerations:
If the surface of an object to be
measured is covered with frost, dust or other materials, surface
cleaning must be performed before accurate measurements can be
made.
High Reflective Surfaces:
If the surface of an object to be
measured is highly reflective with a very low emissivity value, apply
masking tape or apply flat black paint to the surface to raise to improve
the accuracy of the measurement.
Displaying °F or °C
Open the battery compartment, move the slide switch located in the
opening beneath the outermost battery
Battery Replacement
A flashing display indicates that the AAA batteries which power the meter
have weakened. Open the battery compartment on the rear of the meter,
replace the batteries and close the compartment.
Warranty
EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free
of defects in parts and workmanship for one year from date of shipment (a six
month limited warranty applies on sensors and cables). If it should become
necessary to return the instrument for service during or beyond the warranty
period, contact the Customer Service Department at (781) 890-7440 for
authorization. A Return Authorization (RA) number must be issued before any
product is returned to Extech. The sender is responsible for shipping charges,
freight, insurance and proper packaging to prevent damage in transit.
This warranty does not apply to defects resulting from action of the user such as
misuse, improper wiring, operation outside of specification, improper
maintenance or repair, or unauthorized modification. Extech specifically
disclaims any implied warranties or merchantability or fitness for a specific
purpose and will not be liable for any direct, indirect, incidental or consequential
damages. Extech's total liability is limited to repair or replacement of the product.
The warranty set forth above is inclusive and no other warranty, whether written
or oral, is expressed or implied.
Support Hotline (781) 890-7440
Tech support: Ext. 200;
Email: support@extech.com
Repair/Returns: Ext. 210;
Email: repair@extech.com
Website: www.extech.com
IR201 V2.1 8/03