FUSB302 PDF Datasheet浏览和下载

型号.:
FUSB302
PDF下载:
下载PDF文件
内容描述:
[可编程Type-C/USB PD控制器FUSB302]
文件大小:
1298 K
文件页数:
35 Pages
品牌Logo:
品牌名称:
FAIRCHILD [ FAIRCHILD SEMICONDUCTOR ]
PCB Prototype
 浏览型号FUSB302的Datasheet PDF文件第2页浏览型号FUSB302的Datasheet PDF文件第3页浏览型号FUSB302的Datasheet PDF文件第4页浏览型号FUSB302的Datasheet PDF文件第5页浏览型号FUSB302的Datasheet PDF文件第6页浏览型号FUSB302的Datasheet PDF文件第7页浏览型号FUSB302的Datasheet PDF文件第8页浏览型号FUSB302的Datasheet PDF文件第9页 
ADVANCE INFORMATION — CONFIDENTIAL AND PROPRIETARY — DO NOT DISTRIBUTE
FUSB302 — Programmable USB Type-C Controller w/PD
July 2015
FUSB302
Programmable USB Type-C Controller w/PD
Features
Dual-Role Functionality with Autonomous DRP
Toggle
Ability to connect as either a host or a device based
on what has been attached.
Software configurable either as a dedicated host,
dedicated device, or dual role.
Description
The FUSB302 targets system designers looking to
implement a DRP/DFP/UFP USB Type-C connector
with low amount of programmability.
The FUSB302 enables the USB Type-C detection
including attach, and orientation. The FUSB302
integrates the physical layer of the USB BMC power
delivery protocol to allow up to 100 W of power and role
swap. The BMC PD block enables full support for
alternative interfaces of the Type-C specification.
-
Dedicated devices can operate both on a Type-C
receptacle or a Type-C plug with a fixed CC and
VCONN channel.
Full Type-C 1.1 Support. Integrates the following
functionality of the CC pin
Applications
Smartphones
Tablets
Laptops
Notebooks
Power Adapters
Cameras
Dongles
-
Attach/Detach Detection as Host
-
Current Capability Indication as Host
-
Current Capability Detection as Device
-
Audio Adapter Accessory Mode
-
Debug Accessory Mode
-
Active Cable Detection
Integrates CCx to VCONN switch with over-current
limiting for powering USB3.1 Full Featured cables.
USB Power Delivery (PD) 2.0, Version 1.1 Support
-
Automatic GoodCRC Packet Response
-
Automatic retries of sending a packet if a
GoodCRC is not received
-
Automatic soft reset packet sent with retries if
needed
-
Automatic Hard Reset Ordered Set Sent
Dead Battery Support (UFP Mode Support when
No Power Applied)
Low Power Operation: I
CC
= 25 μA (Typical)
Packaged in 9-Ball WLCSP (1.215 mm x
1.260 mm) and 14-lead MLP (2.5 mm x 2.5 mm,
0.5 mm Pitch)
Figure 1.
Block Diagram
Ordering Information
Part Number
FUSB302UCX
FUSB302MPX
Operating
Temperature Range
-40 to 85°C
-40 to 85°C
Package
9-Ball Wafer-Level Chip Scale Package (WLCSP),
0.4 mm Pitch
14-lead MLP 2.5 mm x 2.5 mm, 0.5 mm Pitch
Packing
Method
Tape and Reel
Tape and Reel
www.fairchildsemi.com
© 2015 Fairchild Semiconductor Corporation
FUSB302 • Rev. 1.7