CONVERTER CARD PI-002
PARALLEL TO ANALOGUE YPBPR/RGB 10 BIT
LOW COST
INPUT
Parallel multiplexed component signals to CCIR Rec 656
SMPTE RP-125 coded.
Note. To ease interfacing into equipment data is latched by the rising edge of the clock.
Data rate
Data Set up time
Data hold time
Line standard
27 MHz
3 nS min to positive edge of clock
2.5 nS min from positive edge of clock
625/50 or 525/60 Auto detection
Analogue Output Characteristics
Output format
Output levels
Output Impedance
Output return loss
Resolution
Freq. Response
K-ratings
Noise
Power
YPbPr / RGB
700 mV ±1%
75 Ohms ±1%
> 40 dB to 5.5 MHz
10 bit
Luminance
< 0.2 dB to 5.5 MHz
Chrominance
< 0.2 dB to 2.2 MHz
kp, kpb, kbar <1%
>70 dB rms to 5.5 MHz
+5V
±0.25V
(300mA max)
Mechanical Details
The following formats are available:
Format A
STD configuration with low profile pins and BNC connectors for outputs.
Format B
LOW profile pins and MCX connectors for outputs.
Format C
STAND-OFF configuration with BNC outputs.
© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice
Fara108p
Page 1 of 3
Aug-05(C)