PI-003
PARALLEL DATA TO CVBS 10 BIT
INPUT
Parallel multiplexed component signals to CCIR Rec 656
SMPTE RP-125 coded.
Note. To ease interfacing into equipment data is latched by the rising edge of the clock.
Data rate
Data Set up time
Data hold time
Line standard
27 MHz
3 ns min to positive edge of clock
2.5 ns min from positive edge of clock
625/50 or 525/60 Auto detection
Analogue Output Characteristics
Output signal
No of Outputs:
Output Impedance
Output return loss
Resolution
Freq. Response
PAL-I, NTSC-M, according to line input standard - auto sensing
2
75 Ohms ±1%
> 40 dB to 5.5 MHz
10 bit
< 0.15 dB to 5.5 MHz (with eq set to minimum and gain at 0 dB)
< 0.3 dB to 5.75 MHz
Chroma filtering as specified by CCIR624-3. Equal I/Q filtering for NTSC
kp, kpb, kbar < 0.5%
< 0.1 dB
< 10 ns
< 1.0 degree
< 0.5%
> 70 dB rms to 5.5 MHz
K-ratings
Chroma/luma gain inequality
Chroma/luma delay inequality
Differential phase
Differential gain
Noise
Power
Operating Temp
+ 5V ±0.25V (550mA max)
0°C to 40°C
Note: This item is
NOT
aqueous washable.
© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice
Fara109d.doc
Page 1 of 3
Feb-01(F)