SDI-003
SERIAL D1 TO CVBS/YC MODULE
+
+
+
Small compact design for pcb mounting
Fully filtered and buffered outputs
Three CVBS outputs or CVBS + Y/C output
+
+
Auto 625/525 operation
Reclocked outputs available
This interface card accepts D1 serial digits and provides three analogue Composite video outputs with colour bursts
and mixed sync’s to allow picture display on a Composite video monitor. An interface card with Y/C output (S-Video)
and 1 CVBS output only is available.
Input Requirements
Input
Input Impedance
Line standard
Equalisation
1 x 270 Mb/s serial NRZI
(EBU TECH 3267, SMPTE RP-259M)
75 ohm terminating
625/50 or 525/60 Auto detection
Automatic up to 40 dB at 200 MHz
(Typically 300m of Belden 8281 at 270Mhz
)
3 CVBS or 1 CVBS and Y/C
(As requested)
1 V pk-pk including syncs ±2%
75 ohms
8 bit data / 9 bit DAC
±0.2 dB to 5.5 MHz
> 60 dB rms to 5.5 MHz
2 reclocked serial o/ps
75 ohms
Options B and D only
+ 5V ±0.25V (500 mA max)
- 5V ±0.50V (50 mA max)
0
0
C to 40
0
C
Yes
DR00168C
Analogue Output Characteristics
Output format
Output levels
Impedance
Resolution
Frequency response
Signal-to-Noise ratio
Digital Outputs
Output format
Impedance
Available
Power
Operating Temp.
Aqueous Washable
Package
Other parameters
ORDERING CODES
SDI-003A
SDI-003B
SDI-003C
SDI-003D
Reclocked o/p’s
x
√
x
√
3 x CVBS o/p’s
√
√
x
x
CVBS, Y and C o/p’s
x
x
√
√
© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice
FARA013d.DOC
Page 1 of 2
Sep-01(D)
FARADAY [ FARADAY TECHNOLOGY ]
