SE111-00
SET-TOP VIDEO POST FILTER
The SE111-00 is a surface mountable active hybrid module designed to interface a digital video encoder
to 75Ω composite (CMPS), Luma (Y) and Chroma (C) outputs. Use of high performance operational
amplifiers ensures minimal differential phase/gain errors and the ability to drive ± 2.5V into 75Ω loads.
Other features
•
Drives two composite outputs and one Y/C output
•
accurate factory set gain of 0 dB (6 dB optional - order SE111-60)
•
75Ω output termination resistors provided
•
sinx/x correction for 27 MHz sampling
•
high input impedance - makes interfacing easy
•
DC coupling eliminates tilt problems associated with AC coupling
•
DC offset of encoder output (
due to single rail operation
) is corrected to bring blanking level near zero
•
24-pin j-lead package
FILTER SPECIFICATION FOR EACH CHANNEL
End of Passband
6.0 MHz
Passband shape
sinx/x
Sampling frequency
27 MHz
Amplitude ripple
1
± 0.5 dB to 6.0 MHz,
Gain
0 dB ± 0.2 dB
Group Delay ripple
< 20 ns
Start of stopband
21 MHz
Stopband rejection wrt 100 kHz
> 40 dB (with sinx/x)
Input impedance
100 kΩ typical
Output impedance
75Ω
Supply voltage
± 5V
Supply current
25 mA per rail (typical)
Aqueous Washable
Yes
Package
DR00144A
1
measured against sinx/x predistortion curve
© Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice
FARA088d
Page 1 of 2
Feb-00(B)
FARADAY [ FARADAY TECHNOLOGY ]
