MOTOROLA
Freescale Semiconductor, Inc.
SEMICONDUCTOR TECHNICAL DATA
Order this document
by MPX4115A/D
Integrated Silicon Pressure Sensor
MPX4115A
for Manifold Absolute Pressure,
MPXA4115A
Altimeter or Barometer Applications
SERIES
On-Chip Signal Conditioned,
Temperature Compensated
INTEGRATED
and Calibrated
Motorola’s MPX4115A/MPXA4115A series sensor integrates on–chip, bipolar op amp
circuitry and thin film resistor networks to provide a high output signal and temperature
compensation. The small form factor and high reliability of on–chip integration make the
Motorola pressure sensor a logical and economical choice for the system designer.
The MPX4115A/MPXA4115A series piezoresistive transducer is a state–of–the–art,
monolithic, signal conditioned, silicon pressure sensor. This sensor combines advanced
micromachining techniques, thin film metallization, and bipolar semiconductor processing to
provide an accurate, high level analog output signal that is proportional to applied pressure.
Figure 1 shows a block diagram of the internal circuitry integrated on a pressure
sensor chip.
Features
•
1.5% Maximum Error over 0° to 85°C
•
Ideally suited for Microprocessor or Microcontroller–
Based Systems
•
Temperature Compensated from –40° to +125°C
•
Durable Epoxy Unibody Element or Thermoplastic
(PPS) Surface Mount Package
Application Examples
•
Aviation Altimeters
•
Industrial Controls
•
Engine Control
•
Weather Stations and Weather Reporting Devices
V
S
PRESSURE SENSOR
15 to 115 kPa (2.2 to 16.7 psi)
0.2 to 4.8 Volts Output
Freescale Semiconductor, Inc...
UNIBODY PACKAGE
MPX4115A
CASE 867
SMALL OUTLINE PACKAGE
MPXA4115A6U
CASE 482
MPX4115AP
CASE 867B
SENSING
ELEMENT
THIN FILM
TEMPERATURE
COMPENSATION
AND
GAIN STAGE #1
GAIN STAGE #2
AND
GROUND
REFERENCE
SHIFT CIRCUITRY
V
out
GND
PINS 1, 5, 6, 7 AND 8 ARE NO CONNECTS
FOR SMALL OUTLINE PACKAGE DEVICE
PINS 4, 5 AND 6 ARE NO CONNECTS FOR
UNIBODY DEVICE
MPXA4115AC6U
CASE 482A
MPX4115AS
CASE 867E
PIN NUMBER
1
2
3
4
N/C
V
S
Gnd
V
out
5
6
7
8
N/C
N/C
N/C
N/C
1
2
3
PIN NUMBER
V
out
Gnd
V
S
4
5
6
N/C
N/C
N/C
Figure 1. Fully Integrated Pressure Sensor
Schematic
REV 4
NOTE: Pins 1, 5, 6, 7, and 8 are
internal device connections. Do not
connect to external circuitry or
ground. Pin 1 is noted by the notch in
the lead.
NOTE: Pins 4, 5, and 6 are internal
device connections. Do not connect
to external circuitry or ground. Pin 1
is noted by the notch in the lead.
Motorola Sensor Device Data
©
Motorola, Inc. 2001
For More Information On This Product,
Go to: www.freescale.com
1