Document Reference No.: FT_000401
USB 2.0 HI-SPEED TO MPSSE CABLE Datasheet
Version 1.0
Clearance No.: FTDI# 214
1.1 Available Cables and Part Numbers
The following Table 1.1 gives details of the available C232HM MPSSE cables.
Part Number
Description
End Connector
Cable details
USB to MPSSE cable with +3.3V
digital level signals. Maximum
output of 200mA @ 3.3VDC on
VCC
10 core, UL2464 24 AWG,
diam=6.5mm
Single pole,
C232HM-DDHSL-0
receptacle x 10
(see Note 1)
USB to MPSSE cable with +3.3V
digital level signals. Maximum
output of 200mA @ 5.0VDC on
VCC
10 core, UL2464 24 AWG,
diam=6.5mm
Single pole,
C232HM-EDHSL-0
receptacle x 10
(see Note 2)
Table 1.1 C232HM MPSSE Cable Descriptions and Part Numbers
Note 1: The VCC power output signal (RED wire) is 3.3V. The source of 3.3V is the onboard regulator output, which
is switched onto the power output signal.
Note 2: The VCC power output signal (RED wire) is 5.0V. The source of 5.0V is the USB VBUS input, which is
switched onto the power output signal.
FTDI supports customised end connector designs. For more information, please contact your local FTDI
sales office (see end of datasheet for contact details).
1.2 Certifications
The FTDI C232HM MPSSE cables are fully RoHS, FCC and CE compliant.
Copyright © 2011 Future Technology Devices International Limited
2
FTDI [ FUTURE TECHNOLOGY DEVICES INTERNATIONAL LTD. ]
