欢迎访问ic37.com |
会员登录 免费注册
发布采购

FT2232H 参数 Datasheet PDF下载

FT2232H图片预览
型号: FT2232H
PDF下载: 下载PDF文件 查看货源
内容描述: [上海格里电子科技有限公司是英国FTDI在中国大陆东南亚地区最大的代理商, FTDI一贯坚持USB make easy思想,为工程师提供最简便的解决方案 上海格里电子科技有限公司是英国FTDI在中国大陆东南亚地区最大的代理商, FTDI一贯坚持USB make easy思想,为工程师提供最简便的解决方案: *VNC2 实现UART、FIFO、IIC、SPI、JTAG转到USB HOST接口,可与其他USB DEVICE设备通讯。FTDI提供简单操作命令,工程师只需调用驱动中相应函数,便可实 现对USB device的控制。 *FT232实现单路USB转到UART,包括TTL,及RS485、RS422、RS232等接口。 *FT245实现单路USB转到FIFO,最高能实现8Mbit/s传输速率。 *FT2232H 实现单USB接口转到2通道芯片,每通道可分别配置成UART、FIFO、IIC、 SPI、JTAG等接口。当配置成2路并行FIFO时,每路最大速率达到10MByte/s;当配 置成单路串行FIFO时,可实现最高25MByte/s速率。 *FT4232H实现单USB接口转4通道芯片,每通道可分别配置成UART、IIC、SPI、 JTAG。主要应用在SOC、CPU进行多串口扩展,典型产品为车载多媒体娱乐设备和各 类自主终端。 与同类功能芯片相比,FTDI产品最大优势在于其高品质与高稳定性,主要表现在低坏片率(小于万分之一)、超长时间通讯不中断、不重启,以及驱动的稳定性和驱动的兼容性。FTDI提供免费驱动,经过微软官方认证,支持window98至最新的windows7所有windows系列操作系统,并支持MAC OS、windows mobile、Linux等平台,对于其他平台的驱动,FTDI可提供底层代码以便工程师开发使用。 联 系 人: 何贵平(Gary) 联系电话: 021-64414999 64389812-809 手 机:13661631714 电子邮件: gary@gelitek.com 公司名称: 上海格里电子科技有限公司 公司网站:www.gelitek.com 地 址:上海市徐汇区蒲汇塘路11号1505-1506室]
分类和应用: 先进先出芯片电子驱动电话
文件页数/大小: 58 页 / 1192 K
品牌: FTDI [ FUTURE TECHNOLOGY DEVICES INTERNATIONAL LTD. ]
 浏览型号FT2232H的Datasheet PDF文件第2页浏览型号FT2232H的Datasheet PDF文件第3页浏览型号FT2232H的Datasheet PDF文件第4页浏览型号FT2232H的Datasheet PDF文件第5页浏览型号FT2232H的Datasheet PDF文件第6页浏览型号FT2232H的Datasheet PDF文件第7页浏览型号FT2232H的Datasheet PDF文件第8页浏览型号FT2232H的Datasheet PDF文件第9页  
Document No.: FT_000061
FT2232H DUAL HIGH SPEED USB TO MULTIPURPOSE UART/FIFO IC
Datasheet Version 1.1
Future Technology
Devices International Ltd
FT2232H
Dual High Speed
USB to Multipurpose
UART/FIFO IC
The FT2232H is FTDI’s 5
th
generation
of USB devices. The FT2232H is a USB
2.0
High
Speed
(480Mb/s)
to
UART/FIFO IC. It has the capability of
being configured in a variety of
industry standard serial or parallel
interfaces.
The FT2232H has the
following advanced features:
Single chip USB to dual serial / parallel ports
with a variety of configurations.
Entire USB protocol handled on the chip. No
USB specific firmware programming required.
USB 2.0 High Speed (480Mbits/Second) and Full
Speed (12Mbits/Second) compatible.
Dual Multi-Protocol Synchronous Serial Engine
(MPSSE) to simplify synchronous serial protocol
(USB to JTAG, I
2
C, SPI or bit-bang) design.
Dual independent UART or FIFO ports
configurable using MPSSEs.
Independent Baud rate generators.
RS232/RS422/RS485 UART Transfer Data Rate
up to 12Mbaud. (RS232 Data Rate limited by
external level shifter).
USB to parallel FIFO transfer data rate up to 10
Mbyte/Sec.
Single channel synchronous FIFO mode for
transfers > 25 Mbytes/Sec
CPU-style FIFO interface mode simplifies CPU
interface design.
MCU host bus emulation mode configuration
option.
Fast Opto-Isolated serial interface option.
FTDI’s royalty-free Virtual Com Port (VCP) and
Direct (D2XX) drivers eliminate the requirement
for USB driver development in most cases.
Adjustable receive buffer timeout.
Option for transmit and receive LED drive signals
on each channel.
Enhanced bit-bang Mode interface option with
RD# and WR# strobes
FT245B-style FIFO interface option with bi-
directional data bus and simple 4 wire
handshake interface.
Highly integrated design includes +1.8V LDO
regulator for VCORE, integrated POR function
and on chip clock multiplier PLL (12MHz –
480MHz).
Asynchronous serial UART interface option with
full hardware handshaking and modem interface
signals.
Fully assisted hardware or X-On / X-Off software
handshaking.
UART Interface supports 7/8 bit data, 1/2 stop
bits, and Odd/Even/Mark/Space/No Parity.
Auto-transmit enable control for RS485 serial
applications using TXDEN pin.
Operational configuration mode and USB
Description strings configurable in external
EEPROM over the USB interface.
Configurable I/O drive strength (4,8,12 or 16mA)
and slew rate.
Low operating and USB suspend current.
Supports bus powered, self powered and high-
power bus powered USB configurations.
UHCI/OHCI/EHCI host controller compatible.
USB Bulk data transfer mode (512 byte packets
in High Speed mode).
+1.8V (chip core) and +3.3V I/O interfacing (+5V
Tolerant).
Extended -40°C to 85°C industrial operating
temperature range.
Compact 64-LD Lead Free LQFP or LQFN
package
+3.3V single supply operating voltage range.
Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or
electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty
as to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages
howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use
in any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document
provides preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by
the publication of this document. Future Technology Devices International Ltd, 373 Scotland Street, Glasgow G5 8QB United Kingdom. Scotland
Registered Company Number: SC136640
Copyright © 2008 Future Technology Devices International Limited
1