November 1990
Edition 5.0
DATA SHEET
MB1502
SERIAL INPUT PLL FREQUENCY SYNTHESIZER
LOW POWER SERIAL INPUT PLL SYNTHESIZER
WITH 1.1 GHz PRESCALER
The Fujitsu MB1502, utilizing BI-CMOS technology, is a single chip serial input PLL
synthesizer with pulse-swallow function. The MB1502 contains a 1.1GHz two
modulus prescaler that can select of either 64/65 or 128/129 divide ratio, control
signal generator, 16-bit shift register, 15-bit latch, programmable reference divider
(binary 14-bit programmable reference counter), 1-bit switch counter, phase
comparator with phase conversion function, charge pump, crystal oscillator, 19-bit
shift register, 18-bit latch, programmable divider (binary 7-bit swallow counter and
binary 11-bit programmable counter) and analog switch to speed up lock up time.
It operates supply voltage of 5V typ. and achieves very low supply current of 8mA typ.
realized through the use of Fujitsu Advanced Process Technology.
Plastic Package
DIP-16P-M04
FEATURES
•
High operating frequency: f
IN MAX
=1.1GHz (V
IN MIN
=10dBm)
•
Pulse swallow function: 64/65 or 128/129
•
Low supply current: I
CC
=8mA typ.
•
Serial input 18-bit programmable divider consisting of:
— Binary 7-bit swallow counter: 0 to 127
— Binary 11-bit programmable counter: 16 to 2047
•
Serial input 15-bit programmable reference divider consisting of:
— Binary 14-bit programmable reference counter: 8 to 16383
— 1-bit switch counter (SW) sets divide ratio of prescaler
•
On-chip analog switch achieves fast lock up time
•
2 types of phase detector output
— On-chip charge pump (Bipolar type)
— Output for external charge pump
•
Wide operating temperature: –40_C to +85_C
•
16-pin Plastic DIP Package (Suffix: —P)
16-pin Plastic Flat Package (Suffix: —PF)
OSC
IN
OSC
OUT
1
2
3
4
5
6
7
8
(TOP VIEW)
16
∅R
15
∅P
14
Plastic Package
FPT-16P–M06
Pin Assignment
ABSOLUTE MAXIMUM RATINGS
(See NOTE)
RatIng
Power Supply Voltage
Output Voltage
Open-drain Voltage
Output Current
Storage Temperature
NOTE:
V
P
Value
–0.5 to +7.0
V
CC
to 10.0
f
OUT
Symbol
V
CC
V
P
V
OUT
V
OOP
I
OUT
T
STG
Unit
V
V
V
V
mA
_C
V
CC
D
O
GND
LD
13 BiSW
12 FC
11 LE
10 Data
9
Clock
–0.5 to V
CC
+0.5
–0.5 to 0.8
±
10
–55 to +125
f
IN
Permanent device damage may occur if the above Absolute Maximum RatIngs are exceed-
ed.Functional operation should be restricted to the condItions as detailed in the operational
sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods
may affect device reliability.
This device contains circuitry to protect the inputs against
damage due to high static voltages or electric fields. However,
it is advised that normal precautions be taken to avoid
application of any voltage higher than maximum rated voltages
to this high impedance circuit.
Coypright
©
1990 by FUJITSU LIMITED
FUJITSU [ FUJITSU COMPONENT LIMITED. ]
