FUJITSU SEMICONDUCTOR
DATA SHEET
DS05-20844-4E
FLASH MEMORY
CMOS
16M (2M
×
8) BIT
MBM29F016A
-70/-90/-12
s
FEATURES
• Single 5.0 V read, write, and erase
Minimizes system level power requirements
• Compatible with JEDEC-standard commands
Pinout and software compatible with single-power supply Flash
Superior inadvertent write protection
• 48-pin TSOP(I) (Package Suffix: PFTN-Normal Bend Type, PFTR-Reverse Bend Type)
• Minimum 100,000 write/erase cycles
• High performance
70 ns maximum access time
• Sector erase architecture
Uniform sectors of 64 K bytes each
Any combination of sectors can be erased. Also supports full chip erase.
• Embedded Erase™ Algorithms
Automatically pre-programs and erases the chip or any sector
• Embedded Program™ Algorithms
Automatically programs and verifies data at specified address
• Data Polling and Toggle Bit feature for detection of program or erase cycle completion
• Ready/Busy output (RY/BY)
Hardware method for detection of program or erase cycle completion
• Low V
CC
write inhibit
≤
3.2 V
• Hardware RESET pin
Resets internal state machine to the read mode
• Erase Suspend/Resume
Supports reading or programming data to a sector not being erased
• Sector group protection
Hardware method that disables any combination of sector groups from write or erase operation (a sector group
consists of 4 adjacent sectors of 64 K bytes each)
• Temporary sector groups unprotection
Temporary sector unprotection via the RESET pin
Embedded Erase™, Embedded Program™ and ExpressFlash™ are trademarks of Advanced Micro Devices, Inc.
FUJITSU [ FUJITSU COMPONENT LIMITED. ]
