欢迎访问ic37.com |
会员登录 免费注册
发布采购

GHPC2V530PMT002L 参数 Datasheet PDF下载

GHPC2V530PMT002L图片预览
型号: GHPC2V530PMT002L
PDF下载: 下载PDF文件 查看货源
内容描述: 高效率DC / DC转换器24 / 48V输入, 1.5V , 1.8V , 2.0V , 2.5V , 3.3V DC , 30A输出或5.0V DC, 20A输出 [Very High Efficiency DC/DC Converter 24/48V Input, 1.5V, 1.8V, 2.0V, 2.5V, 3.3V DC, 30A Output or 5.0V DC, 20A Output]
分类和应用: 转换器
文件页数/大小: 7 页 / 1079 K
品牌: GALAXY [ GALAXY POWER, INC. ]
 浏览型号GHPC2V530PMT002L的Datasheet PDF文件第1页浏览型号GHPC2V530PMT002L的Datasheet PDF文件第2页浏览型号GHPC2V530PMT002L的Datasheet PDF文件第4页浏览型号GHPC2V530PMT002L的Datasheet PDF文件第5页浏览型号GHPC2V530PMT002L的Datasheet PDF文件第6页浏览型号GHPC2V530PMT002L的Datasheet PDF文件第7页  
Application Notes
CoolConverter
Galaxy’s proprietary
CoolConverter
provides:
• Patented single-stage power conversion architecture,
control, and magnetic design allow unprecedented power
density and efficiency in an isolated power supply.
• An advanced microcontroller reduces parts count while
adding features, performance, and flexibility in the design.
• Low common-mode noise as a result of lower capacitance
in the transformer compared to planar magnetics and
metal baseplate designs.
• Higher reliability than planar transformer designs that can
suffer from via fatigue from thermal cycling, and metal
baseplate designs with board to board interconnects that
are subject to mechanical stress on electrical connections.
Protection and Control
Valid Input Voltage Range:
The converter measures the input voltage and will not
allow operation outside of the input voltage
specification. As shown by the graphs, hysteresis is
added to both the high and low voltage to prevent the
converter from turning on and off repeatedly when the
voltage is held near either voltage extreme. At low line
this assures the maximum input current is not exceeded;
at high line this assures the semiconductor devices in
the converter are not damaged by excessive voltage
stress.
Overvoltage Lockout
Input Current
Voltage
Rising
Voltage
Falling
75
76
77
78
79
80
Input Voltage (V)
ON/OFF Logic Option:
The ON/OFF control logic can be either Negative
(standard) or Positive to enable the converter. For
Negative logic, the ON/OFF pin is brought below 1.0 V
with respect to the –INPUT pin to enable the converter.
The pull down must be able to sink 100µA. For
Positive logic, the ON/OFF pin is brought to greater
than 4.0V with respect to the –INPUT pin and be
limited to less than 10V. To request the Positive logic
version, add the suffix (P) to the standard part number.
The ON/OFF pin has a built-in pull up resistor of
approximately 100kΩ to +5V.
Undervoltage Lockout
Input Current
Voltage
Rising
Voltage
Falling
30
32
34
36
38
40
Input Voltage (V)
Pisces Series, Page 3
WWW.GALAXYPWR.COM
Part No. 99-002 Rev. 4.0–093003