Operations (Continued)
occurs when the pull station is addressed by the control
panel and either reports back a trouble response or does
not respond at all. With the standard priority interrupt
feature, the MS-95 will report its condition virtually instanta-
neously to the Gamewell-FCI FACP.
Ordering Information
Model
MS-95
MS-95T
30653
30653-01
30653-02
27060
28762
50397G
72198
71961
Description
Analog addressable manual pull station.
Analog addressable manual pull station with
terminals.
Double action option.
Key reset option.
Key reset/double action option.
Breakglass rod.
Surface backbox.
Weather proof gasket for MS-95 station.
NYC backplate manual station backplate with
1"
(2.54 cm)
white stripe.
Backbox, surface for key reset options.
Programming
Programming of the MS-95 manual station address is
accomplished by setting a single DIP switch easily
accessible on the device’s printed circuit board. All other
programming is accomplished at the FACP.
Engineer’s Specifictions
The analog addressable manual pull station shall contain
the electronic interface circuitry required for individual
device identification, alarm reporting andtrouble supervi-
sion. It shall communicate to the main control panel via the
analog addressable circuit. The single-action station shall
consist of a die-cast aluminum housing fitted with a pull out
lever which, when operated, locks in position after activat-
ing an alarm initiating contact.
Specifications
Standby Current:
Alarm Current:
Operating
Temperature:
Relative Humidity:
Material:
Finish:
0.0005 A
0.0015 A
0° C to 49° C (32° F to 120° F)
85%, non-condensing
Die-cast aluminum
Fire alarm red, smooth gloss
enamel. Raised cast letters are
highlighted. Target background for
pull lever is white glossed enamel.
Dimensions MS-95:
4 .625" high x 3.25" wide x 2.0"
deep
(11.75 H x 8.26 W x 5.08 D cm)(
from the backplate).
MS-95T:
4.625" high x 3.25" wide x 1.625"
deep
(11.75 H x 8.26 W x 4.13 cm)
(from the backplate).
MS-95 with key reset
option:
6.25" high x 3.25" wide x 2.0" deep
(15.88 H x 8.26 W x 5.08 D cm)
(from
backplate) with Cat 60 Key.
Surface Backbox
P/N 28762:
4.625" high x 3.25" wide x 2.375"
deep
(11.75 H x 8.26 W x 6.03 D cm)
tapped for 3/4" conduit.
Surface Backbox
71961:
6.25" high x 3.0" wide x 3.25"
(15.88 H x 7.6 W x 8.26 D cm)
deep.
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
www.gamewell-fci.com
CS-2053 Rev. A page 2 of 2
GAMEWELL-FCI [ GAMEWELL-FCI BY HONEYWELL ]
