Operator’s Display
The IF602VE’s operator’s display is the source of all user
access to the system. The display provides all of the nec-
essary keys and annunciation points to maintain and moni-
tor the system. Alarm, supervisory, and trouble conditions
are all indicated on the operator’s display by dedicated
LEDs and an internal sounder. The Acknowledge, Reset,
and Signal Silence keys are located directly below the 4 x
40-character backlit alphanumeric display. All system func-
tions and operational logic can be programmed directly
from the front panel in the field. The IF602VE display
includes four user-programmable function keys.
Features (Continued)
• 25 watt, 25 Vrms audio with integral microphone, digital
message generator.
• Expandable to 50 watts.
• Single Style Z (Class A) or Style Y (Class B) speaker
circuits.
• Up to eight Style Z (Class A) or Style Y (Class B)
speaker circuits with zone splitting.
• Control inputs can be independently field programmed.
• Three command input circuits activate on contact
closure.
• Full manual control of all audio zones provided by zone
page module with keypad, with zone splitting.
• FACP automatically directs the voice message to each
or all audio zones, with zone splitting.
• Live voice paging.
• Remote microphone support.
Analog Addressable Signaling Line Circuits
The IF602VE analog interface module provides Signaling
Line Circuits (SLC), loop circuits that can monitor and con-
trol up to 126 analog/addressable devices on each power-
limited loop, for a total of 252 analog points in a dual-loop
system. Loop wiring is not polarity sensitive.
Each SLC loop has a dedicated microprocessor that simul-
taneously communicates with connected field devices and
the main CPU.
The IF602VE uses the advanced XP95 fully digital commu-
nications protocol to improve the speed and accuracy of
event reporting. The communications protocol provides for
alarm verification per detector, detector adjustability and
compensation, adjustable analog heat detector range
(131°F to 194°F, 55°C to 90°C), circuit isolation, and prior-
ity interrupts. Priority interrupts allow contact-type devices
such as manual fire alarm stations to interrupt the polling
cycle and transmit their addresses at any time during a
polling sequence.
The fully digital protocol allows the IF602VE to operate on
most types of field wiring, greatly expanding its use in retro-
fit applications. Consult the factory for specific wiring
requirements.
I/O Devices
Addressable control output devices are the interface
between analog circuits and building functions. The outputs
are controlled by Control By Event (CBE) software within
the IF602VE, and can be programmed to respond to any
event. The control devices can also be used as supervised
remote signaling circuits.
The IF602VE, with Gamewell-FCI’s complete line of 600
Series devices, provides a foundation for system design.
The IF602VE’s RS-232 output expands system monitoring
and control capabilities.
Remote Display and Control
Add serial annunciators to display system activity and con-
trol. Serial annunciator drivers are available in 16-point
increments and are an ideal interface to graphic annuncia-
tors. Switches can be used for Acknowledge, Reset, Signal
Silence, Drill, etc., to customize the remote status control
network.
An alphanumeric display can also be used for remote sta-
tus and control. The alphanumeric display is designed to
communicate over the serial communications network.
The IF602VE can communicate locally or remotely with a
printer to document system activity.
See the RAN/SAN data sheet (CS-2025) for complete
annunicator details.
IF602VE Power Supply
The IF602VE power supply is a fully regulated 8.0 Amp
supply that furnishes system operating and signaling
power. It is equipped with a battery charger which main-
tains the secondary power source. The power supply is
monitored by the main CPU, ensuring that adequate power
levels are available. The power supply design allows for
high efficiency while providing precise power output. The
battery charger maintains batteries up to 26 AH. The sup-
ply powers four on-board NACs (two Class A) with multiple
built-in synchronization protocols.
Applications
The IF602VE Analog Addressable Control Panel is
designed for new or retrofit small- to mid-sized projects that
require state-of-the-art life-safety systems. The embedded
CPU offers users unrivaled reliability without sacrificing
flexibility or value.
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
www.gamewell-fci.com
CS-2497 Rev. A page 2 of 4
GAMEWELL-FCI [ GAMEWELL-FCI BY HONEYWELL ]
