欢迎访问ic37.com |
会员登录 免费注册
发布采购

700-01204 参数 Datasheet PDF下载

700-01204图片预览
型号: 700-01204
PDF下载: 下载PDF文件 查看货源
内容描述: 十区控制通信 [Ten zone control communicator]
分类和应用: 通信
文件页数/大小: 2 页 / 48 K
品牌: GAMEWELL-FCI [ GAMEWELL-FCI BY HONEYWELL ]
 浏览型号700-01204的Datasheet PDF文件第2页  
FC-10C
TEN ZONE PANEL
Conventional Fire Alarm Control
Description
The FC-10C Fire Alarm Control panel is a proven, versa-
tile, ten-zone modular control with integral communicator
and remote-site upload/download capability. It meets the
requirements of NFPA Standard 72 for Central Station,
Protected Premises, and Remote (DACT) Supervising
Station Fire Alarm Systems. It is Listed to UL Standard
864, inherently power limited and meets all UL transient
immunity requirements.
The integral communicator includes a wide range of se-
lectable transmission formats to communicate to virtually
all central stations. Other features of the communicator
are: A line-active indicator for each of two phone lines,
“Kiss-Off” signal LED, dual “low telephone voltage detect”
circuitry, programmable event codes per format and se-
lectable/deselectable transmission of up to 100 events.
Multiple security techniques allow uploading or download-
ing within one minute without affecting normal fire panel
functions. Key system information that can be uploaded
are: Current System Status, History, Walk Test Files and
System Programming.
An integral voltmeter allows voltage measurements for
Zone, AC line, NAC1, NAC2, resettable power and bat-
tery.
Housed in a red steel enclosure, the surface mounted
unit, (trim ring optional) provides space for two (2) B-7R
batteries.
The many features of the FC-10C control provide a cost
effective approach to systems design, and allow a great
degree of flexibility in one enclosure. Many of these fea-
tures include two (2) notification appliance circuits
(expandable to four) with output expandable from 3.0 to
6.0 amps total. Class A operation is possible with optional
modules. Fully programmable via integral keypad, the
notification appliance circuits may be programmed Si-
lenceable, Non-silenceable, Auto-silence (program 5 to 30
minutes) and Silence Inhibit (60 seconds).
Initiating zones may be programmed for process monitor-
ing via latching or non-latching contact closure and can be
used to monitor high-low temperature, loss of air flow,
water level, gas detection, open/close, refrigeration and
non-fire related tamper functions.
Also programmable are Alarm Presignal Timer, Alarm
Verification Timer and Optional Trouble Reminder.
FC-10C
Features
Inherently power-limited.
Integral digital communicator.
Fifteen (15) selectable transmission formats.
Up to 100 transmitted events/messages.
Fire Drill Function.
Integral voltmeter.
Fully programmable via integral keypad.
Auto-reset supervisory operation.
Temporal pattern output per ANSI S3.41.
Single person walk test with 256 event walk test
memory.
Alarm verification.
Real-time clock/calendar.
256-Event History with time and date stamp, stored in
permanent memory.
Zone disable feature via software.
Two (2) fully programmable Form “A” relay contact
output.
Programmable trouble reminder.
Surface mount technology.
Ground start module (optional).
Contact-by-Zone module (optional).
Serial annunciator output (optional).
Printer interface for on or off-line printing (optional)
An ISO 9000-2000 Company
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472 - Tel: 203-484-7161 - Fax: 203-484-7118
©
2006
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
Gamewell-FCI. All rights reserved.
www.gamewell-fci.com
9020-0459 Rev. G page 1 of 2