Figure 1 INI-VGX
INI-VGX
The INI-VGX is a multi-function module which
incorporates:
•
Network interface using twisted, unshielded wire
or fiber-optic cable.
•
Fully digital message generator.
•
One signaling line circuit for local peripheral
devices.
•
Local fire fighter phone riser.
It occupies a single DIP switch selectable address
on the network and provides termination points for
the network connection using either a pair of
twisted, non-shielded wire (12 AWG max.) or fiber-
optic cable.
The INI-VGX uses advanced Digital Signal
Processing (DSP) technology for audio
compression and filtering allowing E3 Broadband to
produce the clearest audio possible. Background
noise is automatically filtered during voice paging
and fire fighter communications increasing
audibility and eliminating the need for Push-to-Talk
devices.
The INI-VGX can accommodate up to sixteen (16),
different messages with a total combined duration
of three minutes. Each message can be field
installed via a laptop computer and can be in the
form of a voice message or an evacuation tone.
The INI-VGX provides a fire fighter phone riser that
would connect to phone jacks or warden stations
through AOM-TELF modules.
The INI-VGX provides one (1) Signaling Line
Circuit (SLC) to control and supervise Addressable
Output Modules (AOM) serving as speaker circuits
and fire fighter telephone circuits. The INI-VGX
SLC can support up to thirty-two (32), speaker
circuits using the AOM-MUXF for dual channel
applications. In addition, each INI-VGX SLC can
support up to sixteen (16), fire fighter intercom
circuits using the AOM-MUXF.
Figure 2 AM-50
AM-50
The AM-50 is a 50 watt, digital, switching power
amplifier. As many as four (4), AM-50 amplifier
modules can be installed in each INX cabinet.
Each AM-50 provides two (2) speaker circuits that
can be wired Style Y (Class “B”) or Style Z (Class
“A”). The terminal connections can accommodate
up to 12 AWG, twisted, shielded wire. Each circuit
can provide up to 50 watts of power individually or
divide the total 50 watts available between them in
any combination. Each circuit may be individually
activated.
Each AM-50 can be programmed to respond to any
one of 16 messages generated from its local
INI-VGX or individually selected for network voice
paging.
The four (4) amplifiers that can be installed in the
INX can be configured as three (3) main amplifiers
sharing a common standby amplifier or as two (2),
main amplifiers each with its own backup amplifier.
Figure 3 PM-9
PM-9
The PM-9 is a switching power supply that provides
9 amps of filtered and regulated 24 VDC (nominal)
to power the INX transponder. It has an internal
battery charging circuit capable of accommodating
up to 55 A/H batteries as well as an auxiliary 24
VDC output @ 3 amps max.
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472 - Tel: (203) 484-7161 - Fax: (203) 484-7118
www.gamewell-fci.com
9020-0541 Rev. G page 2 of 4
GAMEWELL-FCI [ GAMEWELL-FCI BY HONEYWELL ]
