ANU-48
Description
The ANU-48 LED Driver Module is used in conjunction
with the Gamewell-FCI E3 Series
®
Expandable Emer-
gency Voice Evacuation System and provides output for
up to eight (8), remote panel switches and forty-eight (48),
remote LEDs, contributing to the versatility and flexibility of
the Gamewell-FCI System.
The switches may be programmed as a Speaker Circuit
Switch, a Fire Fighter Phone Switch, or an Auxiliary Con-
trol Switch, using a bank of three (3), switches (one each
for On-Off-Auto functions). Switches may also be pro-
grammed with custom defined functions such as: System
Silence, Alarm Acknowledge, Trouble Acknowledge, Lamp
Test, Alarm Tone On, Manual Select, Drill and System
Reset/LED etc.
Output is also provided for Alarm, Supervisory, System
Trouble, Power Fault, System Silenced, NAC #1 Silenced
and NAC #2 Silenced LEDs. While Underwriters Laborato-
ries Standards only address testing at ambient tempera-
tures down to 32° F, the ANU-48 is Factory Mutual
Approved at an ambient of -40° F/C (non-condensing).
When powered externally, each driver circuit provides a
maximum of .050 amp. with a maximum of 2.4 amperes
per ANU-48 module.
Note: If more than four (4), ANU-48 modules are installed,
an external regulated and power-limited power supply,
Listed for use with fire protective signaling units, is
required.
ANU-48 LED Driver Module
ANU-48
Features
• Listed under UL Standard 864, 9th Edition
• Input for eight (8), software programmable switches,
maintained or momentary contact
• Output for up to forty-eight (48), remote LEDs or driver
circuits
• INI-VG and ILI-MB-E3 can support up to sixteen (16),
ANU-48 LED driver modules or ASM-16 switch modules
for a total of 128 switches and 768 LEDs
• May be located up to 3,000 feet from the control panel,
and up to fifteen (15), additional annunciators can be
connected
• Adaptable to be mounted in any remotely located UL
Listed annunciator enclosure
Specifications
Operating Voltage:
24 VDC resettable
Operating Current:
0.011 amp.*
Operating Temperature:
32° to 120° F (0° to 49° C)
Relative Humidity:
0 to 93%, (non-condensing) at
90° F (32° C)
*Add .003 amp. for any LED to be lit for any condition when pow-
ered internally. When powered externally, each driver circuit pro-
vides a maximum of 0.050 amp. with a maximum of 2.4 amps. per
ANU-48 sub-assembly. (48 circuits).
E3 Series is a registered trademark of Honeywell International Inc.
Ordering Information
Model
ANU-48
Description
Remote LED Driver Module
An ISO 9000-2000 Company
SIGNALING
FM
City of
Chicago
APPROVED
®
S1869
3017416
Approved
City of
Class
1
DENVER
Approved
7300-0694:257 Class
2
High Rise
GAMEWELL-FCI
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
www.gamewell-fci.com
9020-0596 Rev. f2 page 1 of 1
©2007 by Honeywell International Inc. All rights reserved.
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
GAMEWELL-FCI [ GAMEWELL-FCI BY HONEYWELL ]
