欢迎访问ic37.com |
会员登录 免费注册
发布采购

BB-25 参数 Datasheet PDF下载

BB-25图片预览
型号: BB-25
PDF下载: 下载PDF文件 查看货源
内容描述: 十输入监视器模块 [Ten-Input Monitor Module]
分类和应用: 监视器
文件页数/大小: 2 页 / 180 K
品牌: GAMEWELL-FCI [ GAMEWELL-FCI BY HONEYWELL ]
 浏览型号BB-25的Datasheet PDF文件第2页  
PIM-SS
Features
• Ten addressable Class B or
five addressable Class A
initiating device circuits.
• Removable 12 AWG (3.25
mm²) to 18 AWG (0.9 mm²)
plug-in terminal blocks.
• Use with Gamewell’s IF602,
610, 632, 654 and 658 with
SmartScan™ loop card.
• Status indicators for each
point.
• Unused addresses may be
disabled.
• Rotary address switches.
• Class A or Class B operation.
• Mount one or two modules in a
BB-XP cabinet (optional).
• Mount up to six modules on a
CHS-6 chassis in a BB-25
cabinet (optional).
• Mounting hardware included.
Ten-Input Monitor Module
Description
Gamewell’s SmartScan
TM
PIM-SS ten-
input monitor module
provides an
interface between a control panel
and normally open contact devices
in intelligent alarm systems such as
conventional pull stations and heat
detectors.
The first address on the PIM-SS is
set from 01 to 90 and the remaining
modules are automatically assigned
to the next nine higher addresses.
Provisions are included for disabling
a maximum of two unused ad-
dresses.
SS-M with SS-B6 base
The supervised state (normal, open,
or short) of the monitored device is
sent back to the panel. A common SLC input is used for all modules, and the
initiating device loops share a common supervisory supply and ground — other-
wise each monitor operates independently from the others.
Each PIM-SS module has panel-controlled green LED indicators. The panel can
cause the LEDs to blink, latch on, or latch off.
Listings
Listings and approvals below
apply to the PIM-SS Ten-Input
Monitor Module. In some
cases, certain modules may
not be listed by certain ap-
proval agencies, or listing may
be in process. Consult factory
for latest listing status.
• UL Listed: file S521.
• CSFM approved:
file 7300-1288:169.
• MEA approved:
file 368-01-E Vol. II.
Product Line Information
PIM-SS:
Ten-input monitor module.
BB-25:
Optional cabinet for up to six modules mounted on CHS-6 chassis
(be-
low).
Dimensions, DOOR:
24.0" (60.96 cm) wide x 12.632" (32.0852 cm) high, x
1.25" (3.175 cm) deep, hinged at bottom;
BACKBOX:
24.0" (60.96 cm) wide x
12.550" (31.877 cm) high x 5.218" (13.2537 cm) deep.
CHS-6:
Chassis, mounts up to six modules in a BB-25 cabinet.
PIM-SS
CS-2468
09/01/06
Page 1 of 2