CHEMETRON
FL SERIES
Description
The FL Series fixed temperature heat detectors
consist of a white plastic base containing a switch
mechanism, wiring terminals, and a unique three
disc heat collector. Two sections of the heat
collector are soldered together by a fusible eutectic
alloy, which, at rated temperature, will cause the
lower disc to drop away, moving a plunger which
causes the switch to operate. After operation, the
black tip of the plunger is clearly visible. It will
remain in the alarm condition until a new heat
collector is installed.
Circuit continuity and switch operation can be tested
at any time by removing the heat collector.
FIXED TEMPERATURE
HEAT DETECTOR
FL Series
Features
•
Replaceable fusible element.
Ordering Information
Model
FL135
Description
Max. Spacing
•
Positive operation indication.
•
2-circuit models available.
•
Attractive and compact.
Fixed temp. heat detector 135° F (57° C)
30 x 30 ft (UL & FM)
FL200
Fixed temp. heat detector 200° F (93° C)
15 x 15 ft. (UL & FM)
†
FLD135 Fixed temp. heat detector 135° F, dual contacts
30 x 30 (UL & FM)
†
FLD200 Fixed temp. heat detector 200° F, dual contacts
15 x 15 (UL & FM)
FE135
Replacement heat
135° F (57° C)
collector
FE200
Replacement heat
200° F (93° C)
collector
ATA
Adapter for mounting on
3” or 4”
(7.6 or 10.2 cm)
octagonal box
APC
Protective cover
†
Includes ATA adapter
Specifications
Contact Type
Models FL135, FL200
(SPST, normally open)
Models FL135D, FL200D
(DPST, normally open)
Contact Ratings
6.0 amp. @ 8-125 VAC
3.0 amp. @ 6-28 VDC
Dimensions:
2 18” D x 1 1/8” H
(5.5 D x 2.9 H cm)
An ISO 9000-2000 Company
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472 - Tel: (203) 484-7161 - Fax: (203) 484-7118
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
©2006 Gamewell-FCI. All rights reserved.
www.gamewell-fci.com
9020-0035 Rev. F page 1 of 1
GAMEWELL-FCI [ GAMEWELL-FCI BY HONEYWELL ]
