System Sensor
SpectrAlert Series
www.firecontrolinstruments.com
Description
The System Sensor Spectralert
®
select-
able output strobes and horn/strobes offer
enhanced features that include the widest
range of candela options available, and the
capability to recognize and self-adjust for
either 12 or 24 volt operation.
Spectralert selectable candela wall-
mounted strobes and horn/strobes offer
key performance features long associated
with the Spectralert name. The selectable
candela strobes and horn/strobes offer av-
erage current draws that are not only lower
than conventional fixed-candela Spectralert
products, but also lower than similar prod-
ucts by others. By consuming less cur-
rent, the ability to connect even more de-
vices per circuit is possible, resulting in
lower installed cost.
Spectralert selectable candela strobes
and horn/strobes offer the same installa-
tion-friendly features synonymous with the
Spectralert name, such as the option of
2- and 4-wire operation; the ability to use
standard size backboxes with no encroach-
ment into the box; and universal mounting
incorporating the labor-saving QuickClick™
feature. Such labor-saving features make
wire connections simple and fast, further
reducing installed cost.
These strobes and horn/strobes offer the
broadest range of candela options. In ad-
dition, they can operate on either 12V or
24V with no settings required. The device
recognizes and self-adjusts to the correct
current automatically. Temporal Pattern 3
or continuous tone options continue to be
available, in either an electro-mechanical
or 3 kHz pattern
These strobes and horn/strobes incor-
porate the same stylish, low profile design
of the conventional Spectralert products,
for a consistent and aesthetically pleas-
ing appearance across the entire product
line. The selectable strobe and horn/strobe
is available in either red or white.
The devicesmount on a standard 4” x 4”
x 1
1
/
2
” backbox or a single gang 2” x 4” x
SELECTABLE OUTPUT
STROBES AND HORNS
MODELS P1224MC,
1
7
/
8
” backbox using the universal mount-
S1224MC
ing plate included with each Spectralert unit.
An optional strobe sychronization mod-
ule is available for compliance the Ameri-
cans with Disabilities Act (ADA). The MDL
(red) MDLW (white) synchronizes the
strobes at 1 Hz and the horns to a Tempo-
ral 3 coded pattern. The synchronization
modules mounts on a 4
11
/
16
” x 4
11
/
16
” x
2
1
/
8
” backbox and supports two (2) Style
Y (Class B) or one (1) Style Z (Class A)
notification appliance circuit. A separate
horn control input is available to allow
silenceable audible devices and non-
silenceable visual devices on the same pair
or wires.
Features
•
•
•
•
•
•
•
•
•
•
Operates on either12 or 24 VDC
Widest Range of Candela Options:
12V: 15, 15/75 candela
24V: 15, 15/75, 30, 75, 110 candela
Easy Candela Selection
Easy DIP Switch Selection for Horn
Options
Weatherproof Versions Available
Eask Mounting with QuickClick™
Synchronization avalable with
optional MDL Sync•Circuit™ module
Meets UL1971, NFPA72, and ADA
Signaling Requirements
S5512 S4011
3014150
122-02-E
126-02-E
7125-1209:222
7135-1209:223
An ISO 9001 Company
.
Specifications are provided for information only, and
are not intended to be used for installation purposes
and are believed to be accurate. However, no respon-
sibility is assumed by Fire Control Instruments for their
use.
Specifications subject to change without
notice.
© 2003
All Rights Reserved
9020-0562/Ver. 1.2
Page 1 of 3
GAMEWELL-FCI [ GAMEWELL-FCI BY HONEYWELL ]
