SpectrAlert
®
Ceiling Mount Series
SC Strobes and PC Horn/Strobes
6798pho1.jpg
Features
• Lower current draw.
• Available in 15, 15/75, 30, 75, 95, 115,
and 177 candela strobes.
• Horn/strobe models include a three-
position switch for field-selecting horn
tones: electromechanical/3KHz; temporal
3/non-temporal 3; high/low dBA output.
• Synchronizable with MDL Sync•Circuit™
module.
• Ceiling-specific shape, profile, and
aesthetics.
• Mounts to a 4" x 4" x 1.5" (101.6 x
101.6 x 38.1 mm) backbox.
• Round shape offers greater placement
flexibility.
Description
SpectrAlert® Ceiling Mount Series
Strobes and Horn/Strobes
from
System Sensor offer a fresh approach
to the unique needs of ceiling-mount
applications.
Technology
— Like the original
SpectrAlert® line, the SpectrAlert®
Ceiling Mount Series offers significant
current draw reductions over other
ceiling-mount strobes and horn/
strobes.
SC Strobe (top) and
PC Horn/Strobe (bottom)
Flexibility
— SpectrAlert® Ceiling
Mount strobes and horn/strobes are
available in seven different candelas,
including 177 candela for sleeping
areas. The horn/strobe’s tones are
field-selectable with a three-position
switch on the back of the unit.
Selections include: electromechanical
and 3 KHz tones; temporal 3 and non-
temporal 3 patterns; and high and low
volume.
Listings
Listings and approvals below apply to
the SC Strobes and PC Horn/Strobes.
In some cases, certain modules may not
be listed by certain approval agencies,
or listing may be in process. Consult
factory for latest listing status.
• UL Listed: files S4011, S5512.
• ULC Listed: file CS549.
• MEA approved: files 144-00-E, 61-00-E.
• CSFM approved: files 7125-1209:201,
7135-1209:204.
• FM approved.
6798pho2.jpg
Aesthetics
— SpectrAlert® Ceiling Mount strobes and horn/strobes offer a
design that is sensitive to the aesthetic demands of ceiling-mount applications.
The round shape maintains a low-profile appearance, similar to that of a smoke
detector. Its stylish curves and design further refine the aesthetics over other
generic wall/ceiling-mount designs. Yet SpectrAlert®’s round shape provides
clearly visible “FIRE” identification from all angles.
Installation
— SpectrAlert®’s compact design also offers installation savings.
The strobe and horn/strobe models mount to a 4" x 4" x 1.5" (101.6 x 101.6 x
38.1 mm) backbox, and take up little room in the backbox, making connections
easier. With SpectrAlert®’s round shape, aligning the backbox with the room’s
walls is not necessary — SpectrAlert® always lines up.
Architectural/Engineering Specifications
Strobe shall be a System Sensor SpectrAlert® Model ______ Listed to UL 1971
and be approved for fire protective service where ceiling-mount strobes are
permitted. The strobe shall be wired as a primary signaling notification
appliance and shall flash at 1 Hz over the strobe’s entire operating range. The
strobe light shall consist of a xenon flash tube and associated lens/reflector
system.
Horn/Strobe shall be a System Sensor SpectrAlert® Model ______ Listed to UL
1971 and UL 464 and be approved for fire protective service where ceiling-
mount horn/strobes are permitted. The horn/strobe shall be wired as a primary
signaling notification appliance and shall flash at 1 Hz over its entire operating
range. The strobe light shall consist of a xenon flash tube and associated lens/
reflector system. The horn shall have two tone options, two audibility options,
and the option to switch between a temporal 3 pattern and a non-temporal
continuous pattern. These options shall be selected by a multi-position switch.
SpectrAlert® SC/PC
CS-2451
06/10/05
Page 1 of 4
GAMEWELL-FCI [ GAMEWELL-FCI BY HONEYWELL ]
