RCE-95
Description
The Gamewell-FCI Relay Control Element (RCE-95) is the
interface between the Gamewell-FCI 600 Series Fire
Alarm Control Panel (FACP) analog circuits and building
functions such as door holders, elevators, dampers,
motors and disconnects. The RCE-95 offers feedback
input points for positive confirmation of the controlled
device’s activity. The RCE-95 works with all 600 Series
analog addressable FACPs. For annunciation and feed-
back at the panel, Gamewell-FCI offers a Relay Control
Display (RCD). The RCD is only available with the IF632
and IF650 FACPs.
The RCE-95 is either surface or flush mounted and has an
integral LED which annunciates upon device activation.
Relay Control Elements
RCE-95
Operation
The devices connect to the SLC circuit of the FACP via a
two-wire non- polarized circuit. In its quiescent mode, the
RCE-95 monitors its internal circuitry for status of the
device itself and supervises an external control circuit for
status.
When a status change is detected, the event can be pro-
grammed to display on the optional RCD module. When
an event is reported to the control panel that requires the
activation of the RCE-95, the control panel communicates
via the analog circuit to the RCE-95 for activation. The
integral LED is also lit for annunciation at the device.
Features
•
•
•
•
•
•
•
•
•
Compatible with the Gamewell-FCI 600 Series analog
addressable FACPs.
Form-C dry relay contacts.
Event or manual controllable relay functions.
Positive feedback of relay activation.
LED annunciates activation.
Fully supervised.
Surface or flush mounting.
Field programmable.
Style 4, 6 , or 7 wiring.
Screw terminals for field wiring connections.
Programming
The RCE-95 is programmed by setting a single DIP switch
easily accessible on the RCE-95’s printed circuit board.
The DIP switch is used to set the address of the device. All
other programming is accomplished at the Fire Alarm Con-
trol Panel, either through a laptop computer or the control
panel operator’s display.
•
An ISO 9000-2000 Company
SIGNALING
FM
Microsoft Windows is a registered trademark of Microsoft Corporation.
®
®
®
S521
APPROVED
7300-1288:147
GAMEWELL-FCI
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
©2007 Honeywell International Inc. All rights reserved.
www.gamewell-fci.com
CS-2045 Rev. A page 1 of 2
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
CS-2054ph1.wmf
GAMEWELL-FCI [ GAMEWELL-FCI BY HONEYWELL ]
