RPT-E3
Description
The ARCNET Repeater Module (RPT-E3) is an optional
component of the E3 Series
®
Expandable Emergency
Evacuation System. It allows the following remotable, E3
Series sub-assemblies to connect to the Broadband net-
work from remote locations:
• ILI-MB-E3
• NGA
The RPT-E3 is available for use in two versions:
• RPT-E3-FO
• RPT-E3-UTP
RPT-E3-UTP connects to the network using unshielded,
twisted-pair, copper wire only.
RPT-E3-FO communicates to the network using either
62.5/125 multi-mode fiber-optic cable or copper,
unshielded, twisted-pair wire.
Network Repeater
RPT-E3
Features
• Listed under UL Standard 864, 9th Edition
• Provides the capability for remotable E3 Series
sub-assemblies to connect in Styles 4 or 7
configurations
• “FO” option allows either 62.5/125 fiber-optic cable or
copper, unshielded, twisted-pair wire
• “UTP” option available for unshielded, twisted-pair
copper wire only
• 625K baud ARCNET Repeater
Installation
The RPT-E3 is adaptable for installation in standard E3
Series System cabinets. Typically, the RPT-E3 module is
mounted on standoffs on top of the right side of the ILI-MB-
E3 module. Either unit can be easily connected to the
backbox or sub-assembly plate depending on the cabinet
model.
For instructions on installing the RPT-E3, refer to the E3
Series
®
Expandable Emergency Evacuation Installation/
Operating Manual, Part Number: 9000-0574 or the RPT-E3
Installation Instructions, Part Number: 9000-0580.
Ordering Information
Model
Description
RPT-E3-UTP Network Repeaters, unshielded, twisted-pair
RPT-E3-FO Network Repeater, fiber-optic
Specifications
Operating Voltage:
24 VDC FWR
(from PM-9 power supply)
Operating Current:
0.013 amp.
Operating Temperature:
32° to 120° F (0° to 49° C)
Relative Humidity:
0 to 93%, non-condensing at
90° F (32° C)
E3 Series
®
and NetSOLO
®
are registered trademarks of Honeywell International Inc.
An ISO 9000-2000 Company
SIGNALING
FM
APPROVED
MEA
Approved
City of
Chicago
Approved
Class 1
Class 2
High Rise
S1869
3025415 231-06-E
7165-0694:268
7165-0694:269
City of
Denver
Approved
GAMEWELL-FCI
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
www.gamewell-fci.com
9020-0609 Rev. e1 page 1 of 1
©2007 by Honeywell International Inc. All rights reserved.
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
GAMEWELL-FCI [ GAMEWELL-FCI BY HONEYWELL ]
