SNAC-6
Supplementary Notification
Appliance Circuit Panel
Description
The SNAC-6 supplementary notification appliance circuit
panel provides either two (2) Class A, Style Z, four (4)
Class B, Style Y, or one (1) Class A and two (2) Class B
notification appliance circuits, with a total capacity of 6
amperes. These circuits may be activated in groups by
connection to one or two existing Class A or B notification
appliance circuits with operating voltages ranging from 9
to 32 VDC. Either non-coded or coded operation is possi-
ble. In addition, the SNAC-6 can provide a temporal pat-
tern Class B output from a non-coded input.
A unique feature allows for programmable synchronized
outputs for strobes by four (4) different major manufactur-
ers, System Sensor, Faraday, Gentex or Cooper-
Wheelock.
The SNAC-6 contains its own battery charger capable of
maintaining batteries of up to 33 AH. The cabinet provides
space for a set of 7 A/H batteries. It is supervised for
ground fault, over-current, open circuits and low battery
conditions.
Ground fault, battery and circuit trouble conditions in the
panel automatically open the notification appliance circuit
used for activation, transmitting a trouble signal to the
main fire alarm control panel. The ground fault detection
circuit may be disabled.
The unit contains a set of dry, Form “C” trouble actuated
auxiliary contacts, rated 2.5 amp. @ 24 VDC (resistive).
Transfer of these contacts for AC power failure can be
delayed for a period of six (6) hours. This delay feature
may be disabled.
A power-limited, non-resettable auxiliary power output is
also available. The panel can be programmed via DIP
switch to disconnect the auxiliary power output from the
batteries 30 seconds after AC power failure, in order to
avoid running down the batteries from high current
devices such as door holders, etc.
SNAC6
Features
•
UL Listed as a fire alarm accessory for use with any FCI
or other UL Listed fire alarm controls.
•
Two (2) Class A (Style Z), or four (4) Class B (Style Y)
notification appliance circuits or one (1) Class A and two
(2) Class B circuits.
•
Programmable ANSI S3.41 temporal pattern output
(Class B).
•
High current 6 amp. total output.
•
Integral strobe synchronization feature for strobes by
three (3) manufacturers.
•
Integral ground fault detection.
•
Form “C” trouble contacts with delayed AC failure
indication.
Specifications
Operating Power:
120 VAC, 2.7 amp. 60 Hz
Standby Battery Circuit: 24 VDC
(nominal 33 ampere/hours, max.)
Supervisory Current:
0.075 amp.
Alarm Current:
0.175 amp. (excluding notification
appliances)
Alarm Output:
6.0 amp. max. @ 24 VDC
(nominal)
Dimensions:
16” H x 12.25” W x 3” D
(40.64 x 30.88 x 7.62 cm)
Operating Temperature: 32° to 120° F (0° to 49° C)
Relative Humidity:
85% (non-condensing)
An ISO 9001-2000 Company
Ordering Information
Model
SNAC6
Description
Supplementary notification appliance
circuit panel
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472 - Tel: (203) 484-7161 - Fax: (203) 484-7118
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
©2006 Gamewell-FCI. All rights reserved.
www.gamewell-fci.com
9020-0513 Rev. G page 1 of 1
GAMEWELL-FCI [ GAMEWELL-FCI BY HONEYWELL ]
