欢迎访问ic37.com |
会员登录 免费注册
发布采购

GM66151-1.8TA5R 参数 Datasheet PDF下载

GM66151-1.8TA5R图片预览
型号: GM66151-1.8TA5R
PDF下载: 下载PDF文件 查看货源
内容描述: 1.5A超低压降稳压器 [1.5A ULTRA LOW-DROPOUT REGULATOR]
分类和应用: 稳压器
文件页数/大小: 15 页 / 419 K
品牌: GAMMA [ GAMMA MICROELECTRONICS INC. ]
 浏览型号GM66151-1.8TA5R的Datasheet PDF文件第3页浏览型号GM66151-1.8TA5R的Datasheet PDF文件第4页浏览型号GM66151-1.8TA5R的Datasheet PDF文件第5页浏览型号GM66151-1.8TA5R的Datasheet PDF文件第6页浏览型号GM66151-1.8TA5R的Datasheet PDF文件第8页浏览型号GM66151-1.8TA5R的Datasheet PDF文件第9页浏览型号GM66151-1.8TA5R的Datasheet PDF文件第10页浏览型号GM66151-1.8TA5R的Datasheet PDF文件第11页  
ELECTRICAL CHARACTERISTICS (continued)
Note 1:
Maximum positive supply voltage of 60V must be of limited duration (<100msec) and duty cycle ( 1%).
The maximum continuous supply voltage is 26V.
Note 2:
Full Load current (I
FL
) is defined as 1.5A for the GM66150 series.
Note 3:
Dropout voltage is defined as the input-to-output differential when the output voltage drops to 99% of its nominal value with
V
OUT
+ 1V applied to V
IN
Note 4:
V
IN
= V
OUT
(nominal) + 1V. For example, use V
IN
= 4.3V for a 3.3V regulator or use 6V for a 5V regulator. Employ pulse-testing
procedures to minimize temperature rise.
Note 5:
Ground pin current is the regulator quiescent current. The total current drawn from the source is the sum of the load current
plus the ground pin current.
Note 6:
Output voltage temperature coefficient is defined as the worst case voltage change divided by the total temperature range.
Note 7:
Thermal regulation is defined as the change in output voltage at a time T after a change in power dissipation is applied,
excluding load or line regulation effects. Specifications are for a 200mA load pulse at V
IN
= 20V (a 4W pulse) for T = 10ms.
Note 8:
V
REF
V
OUT
(V
IN
-1V), 2.3V
V
IN
26V, 10mA < I
L
I
FL
, T
J
T
J MAX
.
Note 9:
Comparator thresholds are expressed in terms of a voltage differential at the Adjust terminal below the nominal reference
voltage measured at 6V input. To express these thresholds in terms of output voltage change, multiply by the error amplifier
gain = V
OUT
/ V
REF
= (R1 + R2)/ R2. For example, at a programmed output voltage of 5V, the Error output is guaranteed to go
low when the output drops by 95 mV x 5V/1.240 V = 384 mV. Thresholds remain constant as a percent of V
OUT
as V
OUT
is
varied, with the dropout warning occurring at typically 5% below nominal, 7.7% guaranteed.
Note 10:
V
EN
0.8V and V
IN
26V, V
OUT
= 0.
Note 11:
When used in dual supply systems where the regulator load is returned to a negative supply, the output voltage must be
diode clamped to ground.
GM66150 SERIES
7