GF9330 High Performance
HDTV/SDTV Deinterlacer
GF9330 Data Sheet
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
10/8-bit progressive scan output up to 1080p60
support for multiplexed and non-mutiplexed Y/C video
multi-directional edge detection processing
adaptive inter-field motion detection
seamless interface to Gennum's GF9331 motion co-
processor
fully configurable to support custom video modes
3:2 film mode operation for HDTV/SDTV inputs
programmable noise reduction and detail enhancement
de-interlace, pass-through and film rate down conversion
modes of operation
seamless interface to popular ADCs and NTSC/PAL
decoders
ability to extract HVF information from embedded TRS
selectable rounding and clipping of output data
selectable blanking of active video lines
HVF output signals with programmable output video
cropping
serial/parallel host interface
3.3V supply for device I/O and 2.5V for core logic
5V tolerant inputs
Device Overview
The GF9330 is a 10-bit high performance VDSP engine that
performs high quality motion adaptive de-interlacing of
interlaced digital video signals. The GF9330 supports
standard definition (SDTV) and high definition (HDTV) signal
formats and clock rates up to 1080p60 with support for
arbitrary display modes.
The GF9330 uses multi-directional adaptive filters for edge
processing, an adaptive vertical motion filter and an adaptive
inter-field motion filter. The GF9330 features detail
enhancement and noise reduction capabilities. The GF9330
also supports 3:2 pull-down, static/freeze-frame detection and
compensation and film rate conversions. The GF9330 may
operate as a stand-alone de-interlacer or may be used with
the GF9331 Motion Co-processor to enable higher quality HD/
SD de-interlacing with edge and vertical motion detection. The
two devices can be configured in tandem such that the
GF9331 sends edge detection and vertical motion filter control
information to the GF9330. These control signals adaptively
switch the GF9330's internal filters on a pixel-by-pixel basis.
The GF9330 integrates all required line delays and
seamlessly interfaces to off chip SDRAMs that form the
required field delays. The device may also operate in by-pass
mode should no processing of the input signal be desired.
Applications
•
•
•
•
•
•
•
•
HDTV Up/Down Converters
Production Equipment
Video Walls
Projection Systems
Plasma Displays
LCD TVs
Home Theatre Systems
HD DVD Players
Ordering Information
Part Number
GF9330-CBP
Package
328 PIN BGA
Temp. Range
0
o
C to 70
o
C
Control bus from GF9331
Timing
Generator
3:2
Pulldown
Detector
Edge Adaptive
Interpolator
Y/C
Input
Processing
Noise
Reducer
Detail
Enhancer
Vertical Motion
Adaptive Interpolator
Selector
Inter-field Motion
Adaptive Interpolator
Output
Processing
Processed Y/C
Field Merging
Host
Interface
Inter-field
Motion
Detector
External Memory Interface
Block Diagram
Proprietary and Confidential
18283 - 4
June 2004
1 of 42
www.gennum.com
GENNUM [ GENNUM CORPORATION ]
