GS1574 HD-LINX ™ II
Adaptive Cable Equalizer
GS1574 Preliminary Data Sheet
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SMPTE 292M, SMPTE 344M and SMPTE 259M
compliant
Automatic cable equalization
Multi-standard operation from 143Mb/s to 1.485Gb/s
Supports DVB-ASI at 270Mb/s
Small footprint (4mm x 4mm)
Pb-free and Green
Pin compatible with the GS9074 Cable Equalizer
Manual bypass (useful for low data rates with slow
rise/fall times)
Performance optimized for 270Mb/s and 1.485Gb/s
Typical maximum equalized length of Belden 1694A
cable: 140m at 1.485Gb/s, 350m at 270Mb/s
50Ω differential output (with internal 50Ω pull-ups)
Manual output mute or programmable mute based on
max cable length adjust
Single 3.3V power supply operation
Operating temperature range: 0°C to +70°C
Description
The GS1574 is a second-generation high-speed bipolar
integrated circuit designed to equalize and restore
signals received over 75Ω co-axial cable.
The GS1574 is designed to support SMPTE 292M,
SMPTE 344M and SMPTE 259M, and is optimized for
performance at 270Mb/s and 1.485Gb/s.
The GS1574 features DC restoration to compensate for
the DC content of SMPTE pathological test patterns.
A voltage programmable mute threshold (MCLADJ) is
included to allow muting of the GS1574 output when an
approximate selected cable length is reached for
SMPTE 259M signals. This feature allows the GS1574
to distinguish between low amplitude SD-SDI signals
and noise at the input of the device. The serial digital
outputs of the GS1574 may be forced to a mute state by
applying a voltage to the MUTE pin.
Power consumption is typically 270mW using a 3.3V
power supply. The GS1574 is lead-free, and the
encapsulation compound does not contain halogenated
flame retardant.
Applications
•
SMPTE 292M, SMPTE 344M and SMPTE 259M Coaxial
Cable Serial Digital Interfaces.
MCLADJ
CABLE LENGTH ADJUSTOR
CARRIER DETECT
MUTE
MUTE
BYPASS
SDI
SDI
SDO
SDO
EQUALIZER
DC RESTORE
OUTPUT
AGC
GS1574 Functional Block Diagram
Proprietary and Confidential
28854 - 2
December 2004
1 of 17
www.gennum.com