Global Mixed-mode Technology Inc.
G1420
2W Stereo Audio Amplifier
Features
Depop Circuitry Integrated
Output Power at 1% THD+N, VDD=5V
--1.8W/CH (typical) into a 4Ω Load
--1.2W/CH (typical) into a 8Ω Load
Bridge-Tied Load (BTL), Single-Ended (SE)
Stereo Input MUX
Mute and Shutdown Control Available
Surface-Mount Power Package
24-Pin TSSOP-P
General Description
G1420 is a stereo audio power amplifier in 24pin
TSSOP thermal pad package. It can drive 1.8W con-
tinuous RMS power into 4Ω load per channel in
Bridge-Tied Load (BTL) mode at 5V supply voltage. Its
THD is smaller than 1% under the above operation
condition. To simplify the audio system design in the
notebook application, G1420 supports the Bridge-Tied
Load (BTL) mode for driving the speakers, Single-End
(SE) mode for driving the headphone. G1420 can
mute the output when Mute-In is activated. For the low
current consumption applications, the SHDN mode is
supported to disable G1420 when it is idle. The current
consumption can be further reduced to below 5µA.
G1420 also supports two input paths, that means two
different gain loops can be set in the same PCB and
choosing either one by setting HP/
LINE
pin. It en-
hances the hardware designing flexibility.
Applications
Stereo Power Amplifiers for Notebooks or
Desktop Computers
Multimedia Monitors
Stereo Power Amplifiers for Portable Audio
Systems
Ordering Information
ORDER
NUMBER
G1420F31U
Note: F3: TSSOP-24 (FD)
U: Tape & Reel
ORDER NUMBER
(Pb free)
G1420F31Uf
TEMP.
RANGE
-40°C to +85°C
PACKAGE
TSSOP-24 (FD)
Pin Configuration
G1420
GND/HS
TJ
LOUT+
LLINEIN
LHPIN
LBYPASS
LVDD
SHUTDOWN
MUTE OUT
1
2
3
4
5
6
7
8
9
24
23
22
21
20
19
18
17
16
15
14
13
GND/HS
NC
ROUT+
RLINEIN
RHPIN
RBYPASS
RVDD
NC
HP/LINE
ROUT-
SE/BTL
GND/HS
14
Thermal
Pad
LOUT- 10
MUTE IN 11
GND/HS 12
Top View
TSSOP-24 (FD)
Bottom View
Note: Recommend connecting the Thermal Pad to the GND for excellent power dissipation.
Ver: 1.5
Aug 04, 2005
TEL: 886-3-5788833
http://www.gmt.com.tw
1