LCD Switches
Programmable OLED Video Switch and Display
IS Series
PRECAUTIONS FOR HANDLING & STORAGE
ATTENTION
ELECTROST ATIC
SENSITIVE DEVICES
Handling
1. The IS Series OLED devices are electrostatic sensitive. To avoid damage to IC, do not touch keytops unless
properly isolated from static electricity.
2. Signal input under conditions not recommended may cause damage to the OLED unit or deterioration of the
display. Follow directions regarding supply sequences of power and signal voltages.
3. If the OLED panel is broken, avoid contact with the contents and wash oꢀ any spills to the skin or clothing.
4. Limit operating force to switch keytop to 100.0N maximum, as excessive pressure may damage the OLED.
5. For OLED display, it is necessary for terminal of metal cover to be connected to a ground.
6. Recommended soldering time and temperature limits for OLED switch or display:
11 seconds maximum @ 270°C maximum; avoid temperatures exceeding 80°C at the OLED.
7. The IS series OLED devices are not process sealed.
8. If OLED unit is operated with the same display pattern, the diꢀerence between the operation duration of
adjacent pixels may be interpreted as diꢀerence between luminosity of pixels. To minimize this diꢀerence,
operate OLED unit so that each pixel may be turned on at frequency as equal as possible.
9. For switch, clean cap surface with dry cloth. If further cleaning is needed, wipe with dampened cloth using
neutral cleanser and dry with clean cloth. Do not use organic solvent. For display, avoid contact with any
ꢁux or detergent. If any liquids spill on display surface, immediately wipe with soft absorbent cloth.
Storage
1. Store in original container and away from direct sunlight.
2. Keep away from static electricity.
3. Avoid extreme temperatures, high humidity, gaseous substances, and all forms of chemical contamination.
sales@greatecs.com
www.greatecs.com
7
GREATECS [ GREATECS ]
