ISSUED DATE :2005/11/07
REVISED DATE :
G6853
Description
Single Output Hall Effect Switch IC
The G6853 is an integrated Hall Effect switch sensor with output pull-high resistor driver designed for electronic
commutation of brushless DC motor applications and contactless switches. The device includes an on-chip Hall
voltage generator for magnetic sensing, a comparator that amplifies the Hall voltage, and a Schmitt trigger to
provide switching hysteresis for noise rejection, and output driver with pull-high resistor. An internal bandgap
regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide
operating supply range.
If a magnetic flux density larger than threshold Bop, DO is turned on (low). The output state is held until a
magnetic flux density reversal falls below Brp causing DO to be turned off (high).
The G6853 is rated for operation over temperature range from -40
o
C to 150
o
C and voltage range from 3.5V to
28V. The devices are available in low cost die forms or rugged 3 pin SIP packages.
* Wide range of supply voltage:3.5V to 28V
.
*
Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range
.
*
High sensitivity with a small magnet.
*
TTL and MOS ICs directly drivable by output.
* Build in protection diode for chip reverse power connecting.
Features
Application
1) Current Limit
2) Limit Switch
3) Position Sensors
4) Rotation Sensors
5) Revolution Counting
6) Speed Measurement
Package Dimensions
REF.
A
A1
b
b1
Millimeter
Min.
1.245
Max.
1.753
REF.
D
E
L
e
Millimeter
Min.
3.962
2.870
13.60
Max.
4.216
3.124
15.60
0.750REF.
0.330
0.406
0.432
0.508
1.27 REF.
G6853
Page: 1/4
GTM [ GTM CORPORATION ]
