1N4933GP THRU 1N4937GP
SINTERED GLASS JUNCTION
FAST SWITCHING PLASTIC RECTIFIER
VOLTAGE:50 TO 600V
CURRENT: 1.0A
DO-41\DO-204AL
FEATURE
High temperature metallurgic ally bonded construction
Sintered glass cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
350°C/10sec/0.375”lead length at 5 lbs tension
Operate at Ta =75°C with no thermal run away
Typical Ir<0.1µA
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
1N4933
GP
1N4934 1N4935 1N4936 1N4937
SYMBOL
units
GP
100
70
GP
200
140
200
GP
400
280
400
GP
600
420
600
*
*
*
*
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward Rectified
Current 3/8”lead length at Ta =75°C
Peak Forward Surge Current 8.3ms single
Half sine-wave superimposed on rated load
Maximum Forward Voltage at rated Forward
Current and 25°C
Vrrm
Vrms
Vdc
50
35
50
V
V
V
100
If(av)
Ifsm
Vf
1.0
30.0
1.2
A
A
V
*
*
Maximum DC Reverse Current
at rated DC blocking voltage
Ta =25°C
Ta =125°C
5.0
100
µA
µA
Ir
*
*
Maximum Reverse Recovery Time (Note 1)
Trr
Cj
R(ja)
Tstg, Tj
200.0
15.0
55.0
nS
pF
°C /W
°C
Typical Junction Capacitance
Typical Thermal Resistance
(Note 2)
(Note 3)
Storage and Operating Junction Temperature
-65 to +175
Note:
1. Reverse Recovery Condition If =1.0A, Vr =30V
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
* JEDEC registered value
Rev.A4
www.gulfsemi.com
GULFSEMI [ GULF SEMICONDUCTOR ]
