BYW96D THRU BYW96E
SINTERED GLASS JUNCTION
FAST SWITCHING PLASTIC RECTIFIER
VOLTAGE:800 TO 1000V
CURRENT: 3.0A
DO-201AD
FEATURE
High temperature metallurgic ally bonded construction
Sintered glass cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
350°C /10sec/0.375”lead length at 5 lbs tension
Operate at Ta =55°C with no thermal run away
Typical Ir<0.1µA
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
SYMBOL
BYW96D
BYW96E
units
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Vrrm
Vrms
Vdc
800
560
800
1000
700
V
V
V
Maximum DC blocking Voltage
1000
V
(BR)R
Reverse avalanche breakdown voltage
at IR = 0.1 mA
900
1100
V
(min)
Maximum Average Forward Rectified
Current 3/8”lead length at Ta =55°C
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Maximum Forward Voltage at rated Forward
Current and 25°C
If(av)
Ifsm
Vf
3.0
70
A
A
1.50
10
V
Non-repetitive peak reverse avalanche energy
(Note 1)
Ersm
mJ
5.0
µ
µ
A
A
Maximum DC Reverse Current
at rated DC blocking voltage
Ta =25°C
Ta =150°C
Ir
150
Maximum Reverse Recovery Time (Note 2)
Trr
Cj
300
60
nS
pF
Typical Junction Capacitance
Typical Thermal Resistance
(Note 3)
(Note 4)
R(ja)
16
°C /W
°C
Storage and Operating Junction Temperature
Tstg, Tj
-65 to +175
Note: 1.R=400mA; Tj=Tjmax prior to surge; inductive load switched off
2.Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
3.Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
4.Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
Rev.A1
www.gulfsemi.com
GULFSEMI [ GULF SEMICONDUCTOR ]
