GP10T
SINTERED GLASS JUNCTION
PLASTIC RECTIFIER
VOLTAGE:1300V
CURRENT: 1.0A
FEATURE
High temperature metallurgically bonded construction
Sintered glass cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
350°C /10sec/0.375”lead length at 5 lbs tension
Operate at Ta
=55°C
with no thermal run away
Typical Ir<0.1µA
DO-41\DO-204AL
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward Rectified Current
3/8”lead length
Peak Forward Surge Current 8.3ms single half sine-
wave superimposed on rated load
Maximum Instantaneous Forward Voltage at 1.0A
Maximum full load reverse current full cycle
Average at 75°C
Maximum DC Reverse Current
Ta =25°C
at rated DC blocking voltage
Ta =125°C
Typical Reverse Recovery Time
(Note 1)
Typical Junction Capacitance
(Note 2)
Typical Thermal Resistance
(Note 3)
Storage and Operating Junction Temperature
Note:
1. Reverse Recovery Condition If
=0.5A,
Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
GP10T
1300
910
1300
1.0
25.0
1.3
30.0
5.0
50.0
2.0
5.0
55.0
-65 to +150
units
V
V
V
A
A
V
µA
µA
µS
PF
°C
/W
°C
Vrrm
Vrms
Vdc
If(av)
Ifsm
Vf
Ir(av)
Ir
Trr
Cj
Rth(ja)
Tstg, Tj
Rev.A1
www.gulfsemi.com
GULFSEMI [ GULF SEMICONDUCTOR ]
